更多"[单选题]If the upper ECAM display fail"的相关试题:
[单选题]If upper ECAM display is lost, engine/warning indication automatically switches to lower ECAM display. If system display is required, then:
A. turn off the corresponding ECAM display selector
B. press and hold the corresponding system button
C. press the select key
[单选题]If the ECAM control panel fails, what will happen after pressing ALL pb?
A. all SD can be displayed in sequence
B. there will be no indication
C. a caution will be triggered
[单选题]If ECAM control panel fails, which of the following pushbuttons is inoperative?
A. CLR
B. STS
C. ELEC
[单选题]If DMC 1 (Display Management Computer) fails,
A. DMC3 will automatically replace DMC 1
B. manually replace DMC 1 with DMC 3
C. it cannot be replaced
[单选题]The ECAM display uses a color code, in which magenta means:
A. the actions to be carried out or limitations
B. particular messages that apply to particular pieces of equipment or situations (inhibition messages, for example)
C. the configuration or failure need to be noticed, but need not take immediate action
[单选题]琥珀色ECAM信息,无音响属于()ECAM警告
A.LEVEL1
B.LEVEL3
C.LEVEL2
D.LEVEL1和LEVEL2
[单选题]如果ECAM下显示器故障,那么ECAM下显示器的内容会:
A.自动显示在ECAN上显示器上
B.通过ECAM-ND转换开关选择显示在机长或副驾驶的ND上。
C.自动显示在副驾驶的ND上
D.通过E/WD和S/D转换开关转移到ECAM上显示器上
[单选题]如果失去ECAM上部显示,发动机警告显示自动转换到ECAM下部显示,如果需要系统显示,必须:
A. 关掉对应的ECAM显示选择器
B. 按下并保持相应的系统按钮
C. 按下调用钮
[单选题] 如果失去ECAM上部显示,发动机警告显示自动转换到ECAM下部显示,如果需要系统显示,必须:
A. 关掉对应的ECAM显示选择器
B. 按下并保持相应的系统按钮
C. 按下调用钮
[单选题]当ECAM处于单显状态时(只有一个ECAM显示组件)触发了咨询信息时,那么:
A.相关的系统页面会自动显示在ECAM显示组件上
B.咨询信息ADV的字样会出现在E/WD的上部,此外ECAM控制面板上相关的按钮会闪亮,以指示相关的系统页面
C.会有STS字样在ECAM上显示,ECAM控制面板上相关的按钮会闪亮,以指示相关的系统页面
[单选题]如果失去ECAM上部显示,发动机告警显示自动转换到ECAM下部显示,如果需要系统显示,你必须
A.关掉对应的ECAM显示选择器
B.按下并保持相应的系统按钮
C.按下CLEAR钮
D.按下RECALL钮
[单选题]发生系统失效引起的ECAM动作,操作飞机的飞行员在多大的高度以上,不要指令执行ECAM动作,仅仅需要指令抑制声响警告?
A.100 FT
B. 200 FT
C.300 FT
D. 400 FT
[单选题]最低设备清单的ECAM警告部分给出了ECAM警告信息和______之间的联系,供放行飞机时参考。
A.CDL项目或FCOM
B.MEL项目或FCOM
C.MEL项目或AFM