更多"[单选题]If DMC 1 (Display Management C"的相关试题:
[单选题]The function of Display Management Computer (DMC) is to:
A. generate alert messages, memos, aural alerts, and synthetic voice messages
B. acquire data, then generate signals, and sent the signals to the 3 DMCS (Display Management Computer), which use them to generate displays of system pages and engine parameters\
C. obtain and process data from the different sensors and computers, generate images and display on PFD, ND, E/WD and SD
[单选题]If FWC 1(Flight Warning Computer) fails,
A. manually replace FWC 1 with FWC 2
B. half of the warnings in Display Management Computer (DMC) will be lost
C. FWC2 will automatically replace FWC1
[单选题]If the upper ECAM display fails, or is switched off, the engine/warning page automatically displays on:
A. Captain’s PFD
B. First Officer’s PFD
C. the system/status page of the lower ECAM DU
[单选题] DMC失效时将转换面板上的EIS DMC转换选择电门置于APT 3位，用DMC3代替：
A. DMC1
B. DMC2
C. DMC1和DMC2
[单选题]In case of DMC failure, set the EIS DMC switching selector on the switching panel to APT 3 position, so as to replace _____ with DMC 3.
A. DMC1
B. DMC2
C. DMC1 and DMC2
[单选题]DMC功用
A.数据采集,显示管理
B.计算文字警告
C.产生音响警告
D.驱动主警戒灯
[判断题]老线当脱水釜进完DMC原料后，DMC输料泵可以不用关闭一直运转。
A.正确
B.错误
[单选题]What happens when RMP2 fails?
A. Communication system fails
B. VHF2 frequency cannot be controlled
C. All frequency of the communication system can be controlled
[单选题]If pressure regulation fails, the overpressure valve closes
A. When pressure is above 56 psi
B. When pressure is above 68 psi
C. When pressure is above 85 psi
[单选题]When some of the weather radar function fails, the detected fault list on ND, which is correct?
A. A. If it is red message, no radar images displayed on ND; if it is amber messages,no effects on images
B. B. When there are red or amber messages displayed, no radar images displayed on ND
C. C. Both red and amber messages do not affect the radar images
[单选题]In flight, if pressure controller 1 fails：
A.manual operation must be performed
B.automatically convert to controller 2
C.manually select controller 2
[单选题]If one elevator fails, the deflection of the remaining elevator is limited in order to _____
A. avoid putting excessive asymmetric loads on the horizontal tailplane
B. avoid putting excessive asymmetric loads on the rear fuselage.
C. all of the above
[单选题]Air-conditioning unit controller fails, the temperature of air-conditioning unit exit is regulated to： ℃
A.10
B.18
C.15
[单选题]If the ECAM control panel fails, what will happen after pressing ALL pb？
A. all SD can be displayed in sequence
B. there will be no indication
C. a caution will be triggered
[单选题]If ECAM control panel fails, which of the following pushbuttons is inoperative？
A. CLR
B. STS
C. ELEC
[单选题]If both RTL fails, when returning to low speed logic:
A. move retaining device to recover the maximum rudder deflection when slats reach out
B. retain RTL at the last position
C. move retaining device to the maximum rudder deflection at any time
[单选题]If a fuel level detector fails, what will take place?
A. Associated fuel level indicator light turns on
B. Fuel level indication disappear
C. Fuel level indication remains unchanged
[单选题]If bleed pressure fails, engine anti-icing valve ____
A. Keeps OFF
B. Keeps ON
C. Keeps normal position
