更多"[单选题]SLB必须在哪种类型的单板上配置? ( )"的相关试题:
[单选题]SLB必须在哪种类型的单板上配置? ( )
A.MPU
B.PSU
C.CSU
D.SFU
[单选题]xGW-PDSN系统中,CU网元必须在哪种类型的单板上配置?( )
A.MPU
B.PFU
C.GSU
D.CSU
[判断题]OTU单板上电后,红绿灯交替闪烁,说明单板本身正常运行,只是网管上没有配置该单板。
If the red and green indicator lights flash alternatively when an OTU board is powered on, it indicates the board is working normally but is not configured in the EMS.
A.正确
B.错误
[判断题]开通uMAC SGSN商用局时,UOMP和USMP不能合一,必须配置在不同的单板上。
A.正确
B.错误
[判断题]开通uMAC SGSN商用局时,UOMP和USMP不能合一,必须配置在不同的单板上。
During the commissioning of a commercial uMAC SGSN office, UOMP and USMP cannot be combined and they must be configured on different boards.
A.正确
B.错误
[多选题]PDSN 配置数据备份,通过FTP 客户端软件连接到PDSN的MPU单板上,进入/sysdisk0/目录,将()目录下的所有文件备份。
To back up configuration data of the PDSN, we need to connect to the MPU board of the PDSN through the FTP client software, enter the "/sysdisk0/" directory, and back up all files under the following directories: ( ).
A.DATA0
B.DATA1
C.vmm
D.config
[单选题]只有GSU单板上的子卡编号中有XSFC的CPU才可以配置成为CU,一般是GSU上面的()号CPU?
A.0
B.1
C.2
D.3
[单选题]关于xGW(PDSN),分配静态IP时,地址池类型必须被配置为()。
A.local
B.aaa
C.static
D.assigned
[单选题]关于xGW(PDSN),分配静态IP时,地址池类型必须被配置为()。
On the xGW (PDSN), during assignment of static IP addresses, the IP address pool type must be set to ( ).
A.local
B.aaa
C.static
D.assigned
[单选题]uMAC SGSN采用独立交换时,UBSW在ECMM上的类型必须配置为()。
When independent switching is used on the uMAC SGSN, the board type of UBSW must be configured as ( ) on the ECMM.
A.OMM
B.OMP
C.Independent_board
D.PP
[判断题]使用专用串口线连接PC机和xGW机架上的MPU单板上的CONSOLE口,普通的调试路由器的串口线无法使用。
We should use a dedicated serial cable to connect the PC to the CONSOLE port of the MPU board on the xGW rack. The normal serial cable for debugging routers does not work.
A.正确
B.错误
[单选题]我司的带外FEC功能模块做在了哪种单板上( )
A.NCP
B.OMU
C.OSC
D.OTU
[单选题]MPU单板上,用于连接EMS的接口是()。
In MPU,() is the interface that connected with EMS.
A.CTRL ETH1
B.CTRL ETH2
C.MGMT ETH
D.CONSOLE