更多"[判断题]开通uMAC SGSN商用局时,UOMP和USMP不能合一,"的相关试题:
[判断题]开通uMAC SGSN商用局时,UOMP和USMP不能合一,必须配置在不同的单板上。
A.正确
B.错误
[判断题]开通uMAC SGSN商用局时,UOMP和USMP不能合一,必须配置在不同的单板上。
During the commissioning of a commercial uMAC SGSN office, UOMP and USMP cannot be combined and they must be configured on different boards.
A.正确
B.错误
[单选题]uMAC SGSN进行USMP、USUP_GPRS、USUP_3G三类模块扩容时,都需要做的操作是()。
While expanding the USMP, USUP_GPRS, and USUP_3G modules on the uMAC SGSN, we must perform the following operation: ( ).
A.修改CG配置
Modify CG configuration
B.修改控制面负荷分担配置
Modify the control-plane load sharing configuration.
C.全局重启
Reboot the SGSN
D.以上都不是
None of the above
[单选题]在uMAC SGSN中,ECMM子卡是集成在()单板上的。
In uMAC SGSN,ECMM subcard is generated in ().
A.EGFS
B.EGBS
C.ECDM
D.EMSI
[单选题]uMAC SGSN中,框间的时钟级联线接在()单板上。
In uMAC SGSN, the inter-shelf cascading clock cables are connected to the ( ) board.
A.UBSW
B.UFSW
C.UIPB
D.UOMP
[单选题]uMAC SGSN扩容USMP模块时,需要做的操作不包括()。
While expanding the USMP module on the uMAC SGSN, we do not perform the following operation: ( ).
A.修改CG配置
Modify CG configuration.
B.修改控制面负荷分担配置
Modify the control-plane load sharing configuration.
C.修改GTPC信令地址配置
Modify GTPC address configuration
D.全局重启
Reboot SGSN
[多选题]uMAC SGSN扩容USMP模块时,需要做改动的是()。
While adding a USMP module on the uMAC SGSN, we need to modify the following configurations: ( ).
A.CG计费服务器配置
CG server configuration
B.控制面负荷分担配置
Control-plane load sharing configuration
C.GTPC信令地址配置
GTPC signaling address configuration
D.IP协议栈配置
IP protocol stack configuration
[多选题]uMAC SGSN扩容场景包括()。
For the uMAC SGSN,expansion scenarios include ().
A.USMP扩容
USMP expansion
B.USUP_GPRS扩容
USUP_GPRS expansion
C.USUP_3G扩容
USUP_3G expansion
D.License扩容
License expansion
[单选题]uMAC SGSN中,负荷分担配置包括()。
On the uMAC SGSN, load sharing configuration includes ().
A.控制面负荷分担配置
Control-plane load sharing configuration
B.Gb用户面负荷分担配置
Gb user-plane load sharing configuration
C.Iu用户面负荷分担配置
Iu user-plane load sharing configuration
D.以上都是
All of the above
[单选题]uMAC SGSN中,OMM通过()与OMP通信。
In uMAC SGSN, OMM communicates with OMP by ( ).
A.ETH2
B.ETH3
C.Trunk0
D.Trunk1
[多选题]uMAC SGSN中,哪些接口推荐采用负荷分担方式?
In uMAC SGSN, the following interfaces are recommended to use the load sharing mode: ( ).
A.Gn
B.Iu
C.Gr
D.Ga
[多选题]uMAC SGSN中,哪些接口推荐采用OSPF路由方式?
In uMAC SGSN, the following interfaces are recommended to use the OSPF routing mode: ( ).
A.Gn
B.Iu
C.Gr
D.Ga
[单选题]uMAC SGSN中,产生话单的模块类型是( )。
In the uMAC SGSN, the ( ) module type generates CDRs.
A.UOMP
B.USMP
C.USUP_GPRS
D.USUP_3G
[单选题]uMAC SGSN中,一块UIPB支持()个GE接口。
In uMAC SGSN, one UIPB can support ( ) GE interfaces.
A.2
B.4
C.6
D.8
[多选题]uMAC SGSN中,OMM通过SNMP方式管理的单板包括()?
In uMAC SGSN, the following boards are managed by OMM via SNMP: ( ).
A.OMP
B.ECMM
C.UBSW
D.UFSW