更多"An administrator is configuring IP "的相关试题:
[多项选择] An administrator is configuring a Catalyst switch with VLAN information that must be automatically distributed to other Catalyst switches in the network. What conditions must be met in order for the VLANs configured on this switch to be automatically configured on the other switches?（）
A. The switch that will share its VLAN configuration must be in VTP server mode.
B. The switches must be in the same VTP domain.
C. The switch that will share the VLAN information must be configured as the root bridge.
D. The switches must be connected over VLAN trunks.
E. The switches must be configured to use the same STP version.
F. The switches must have VTP pruning activated.
[多项选择]An administrator is configuring one server to monitor hardware level information on a second Windows server.Which of the following should be setup on the Windows server to allow the monitoring server to access this information?（）
A. WMI
B. RIS
C. DNS
D. SNMP
E. SMTP
[单项选择] An administrator is configuring an LPAR for a NIM installation and is unsure if the 'Ping Test' option within SMS is a required configuration step. Which statement best describes the 'Ping Test' option?（）
A. The 'Ping Test' is a recommended step to verify the IP information entered into the RIPL SMS panel.
B. The 'Ping Test' is a mandatory step required to commit the IP information entered into the RIPL SMS panel.
C. The 'Ping Test' is an optional step to verify network configuration entered into the RIPL SMS panel on older copper-based networks.
D. The 'Ping Test' is an optional step to verify network connectivity between client and server, where ICMP traffic is allowed on the connecting network.
[多项选择]A network administrator is configuring ACLs on a cisco router,to allow traffic from hosts on networks 192.168.146.0,192.168.147.0,192.168.148.0and192.168.149.0 only.Which two ACL statements when combined are the best for accomplishing the task?（）
A. access-list 10 permit ip 192.168.147.0 0.0.0.255.255
B. access-list 10 permit ip 192.168.149.0 0.0.0.255.255
C. access-list 10 permit ip 192.168.146.0 0.0.0.0.255
D. access-list 10 permit ip 192.168.146.0 0.0.0.1.255
E. access-list 10 permit ip 192.168.148.0 0.0.0.1.255
F. access-list 10 permit ip 192.168.146.0 255.255.255.0
[多项选择]Which two are correct when configuring an IP address for a Fast Ethernet interface?（）
A. set interfaces fe-0/0/0 address 10.1.1.1/24
B. set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24
C. set interfaces fe-0/0/0.0 address 10.1.1.1/24
D. set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
[单项选择] An administrator is configuring a PowerHA cluster consisting of two nodes across two physical Power systems，570-1 and 570-2. Node1 is an LPAR on 570-1Node2 is an LPAR on 570-2. Dev1 is an LPAR on 570-2 （this LPAR is not part of the cluster）. The cluster will manage a single resource group， RG1， with a single application server， APP1. The resourcegroup will have a home node of Node1. Node1 is configured with 4.0 CPU desired， 0.4 minimum， 4.0 maximum， and 4 virtual processorsNode2 isconfigured with 0.4 CPU desired， 0.4 minimum， 4.0 maximum， and 4 virtual processors Dev1 is configuredwith 4.0 CPU desired， 0.4 minimum， 4.0 maximum， and 4 virtual processors When the resource group RG1 is acquired by Node2 the administrator would like to dynamically move 3.6processor entitlement units from Dev1 to Node2. How could the administrator achieve this in the PowerHAcluster？（）
A. Create a custom event script to perform the change to CPU entitlement
B. Modify the extended performance tuning parameters for the cluster to modify CPU entitlement uponresource group acquisition
C. Customize the resource group attributes of RG1 so that the CPU entitlement is modified for Node2 uponresource group acquisition
D. Customize the application server attributes of APP1 so that the CPU entitlement is modified for Node2upon resource group acquisition
[单项选择]An administrator is configuring a new cluster and has a requirement for a notification to be generated if the /tmp File System becomes greater than 90% full. Which of the following PowerHA components will support theadministrator’s requirement？（）
A. Pre-defined Events
B. User-defined Events
C. Remote notification methods
D. The integration between RMC and WebSM
[单项选择]An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?（）
A. IP address:192.168.20.14 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.9
B. IP address:192.168.20.254 Subnet Mask:255.255.255.0 Default Gateway:192.168.20.1
C. IP address:192.168.20.30 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.25
D. IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.17
E. IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.25
[单项选择] An administrator only has one public IP address that must be shared among five employees. Which of the following network schemes should be used?（）
A. SNAT
B. SNAP
C. NAC
D. MPLS
[单项选择]When configuring non-IP point-to-point networks on clusters that are larger than two nodes， which Type of configuration should be defined？（）
A. A start
B. A ring
C. A target mode fc
D. A target mode scsi
[多项选择]Which options would you consider while configuring a flash recovery area (fast recovery area in 11g Release 2) for your production database that is running in ARCHIVELOG mode?（）
A. Setting the FAST_START_MTTR_TARGET to set the mean time to recover
B. Setting the RECOVERY_PARALLELISM parameter to twice the number of CPUs
C. Using the DB_RECOVERY_FILE_DEST parameter to set the location for flash recovery area
D. Using the DB_RECOVERY_FILE_DEST_SIZE parameter to define the disk space limit for the recovery files created in the flash recovery area
[单项选择]Which parameters must you select when configuring operating system probes SCREEN options?（）
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
[单项选择]What is the purpose of configuring Workload Manager on a server used for development and QA?（）
A. To experiment with shared processor pools
B. To isolate physical hardware between workloads
C. To control resource utilization on an application-by-application basis
D. To leverage Workload Partition Manager for performance trending and analysis
