更多"[多选题]单板软件优化时需要注意以下哪几点?"的相关试题:
[多选题]xGW GGSN单板倒换需要注意的事项有()。
During switching of xGW GGSN boards, you need to pay attention to the following items: ( ).
A.禁止人工复位或插拔主用MPU或GSU单板
It is forbidden to manually reset or plug out the master MPU or GSU.
B.备用MPU上电后10分钟内禁止进行MPU主备倒换
Within 10 minutes after the slave MPU is powered on, it is forbidden to perform master/slave switchover of the MPU.
C.备用GSU单板或CPU上电后5分钟之内禁止进行该GSU单板或GSU CPU的主备倒换
Within 5 minutes after the slave GSU board or the MPU is powered on, it is forbidden to perform master/slave switchover of this GSU board or the GSU CPU.
D.禁止使用redundancy switch sc force命令强制倒换MPU单板
It is forbidden to switch over the MPU board by force by running the "redundancy switch sc force" command.
[判断题]无源单板就是不需要电源的单板,日常维护可以随意掉电。
The passive board is the board that requires no power supply and the power can be cut off at will during the routine maintenance.
A.正确
B.错误
[多选题]插拔单板时,以下注意事项说法正确的是
A.插入单板时应佩戴防静电手腕及防静电手套,且用力要轻,以免弄歪单板上的插针
B.顺着单板滑道插入单板
C.禁止单板电路面互相接触以免引起短路或刮伤
D.禁止裸手触摸单板电路元件连接器或接线槽,以免人体静电损坏敏感器件
[判断题]USUP单板采用单地址方案,所有USUP_GPRS模块配置相同的IP地址,备用单板的不需要增加板号。
The single-address plan is used on the USUP board. That is, all USUP_GPRS modules are configured with the same IP address, and we do not need to add the board module for the slave board.
A.正确
B.错误
[多选题]资金查询在实际使用当中需要注意以下几点:
A.账号类别分个人账号和对公账号,需对应勾选
B.卡号查询开户信息时,账户名为非必填项,因部分银行卡会校验用户名,填写错误会导致查询失败,所以建议不填
C.每条查询时间段不能超过一个月(部分银行不能超过30天)
D.部分银行不支持对公账号、信用卡账号查询
E.反馈如超过1000条,超出部分将不显示,可将查询时间缩短重新查询
[多选题]在进行xGW的MPU单板的boot升级或者降级后,重启MPU单板之前,需要进行的操作是?( )
A.Format “/DATA0”
B.Format “/DATA1”
C.FlashReInitial
D.在串口模式下输入write
[多选题]插拔单板注意事项有( )。
A.先佩戴防静电手腕
B.拔下后单板要放入防静电袋中
C.不要用手触摸单板上的器件
D.要注意单板的防误插导套
[单选题]用户操作时只针对网元,不需要关心各个单板以及单板软件的选择的升级方法是
A.单个单板软件升级
B.批量升级
C.网元包升级
[单选题]表现重音注意几点( )
A.注意三点
B.注意四点
C.注意五点
[多选题]xGW GGSN扩容GSU单板时,需要申请的资源包括()。
While expanding the GSU board on the xGW GGSN, we need to apply for the following resources: ( ).
A.GTP-C/U地址
GTP-C/U address
B.CG-agent地址
CG-agent address
C.IP 地址池
IP pool
D.SLB地址
SLB address
[多选题]xGW GGSN扩容GSU单板时,需要做改动的是()。
While expanding the GSU board on the xGW GGSN, we need to modify the following configurations: ( ).
A.GSU group 配置
GSU group configuration
B.Diameter链路配置
Diameter link configuration
C.IP 地址池配置
IP pool configuration
D.Loopback接口地址配置
Loopback interface address configuration
[单选题]关于ZXONE8000 的LO2单板,背板交叉需要支持ODU0,业务类型需要设置为
A.OTU2
B.OTU2E
C.OTU2u
D.OTU1
[单选题]xGW GGSN扩容GSU单板时,需要申请的资源不包括()。
During GSU expansion on the xGW GGSN, we do not need to apply for the following resource: ( ).
A.GTP-C/U IP address
B.CG-agent IP address
C.IP Pool
D.SLB IP address
[单选题]关于ZXONE8000的LO2单板,背板交叉需要支持ODU2,业务类型需要设置为( )
A.OTU2
B.OTU2E
C.OTU2u
D.OTU1