更多"[多选题]xGW GGSN扩容GSU单板时,需要做改动的是()。
W"的相关试题:
[多选题]xGW GGSN扩容GSU单板时,需要申请的资源包括()。
While expanding the GSU board on the xGW GGSN, we need to apply for the following resources: ( ).
A.GTP-C/U地址
GTP-C/U address
B.CG-agent地址
CG-agent address
C.IP 地址池
IP pool
D.SLB地址
SLB address
[单选题]xGW GGSN扩容GSU单板时,需要申请的资源不包括()。
During GSU expansion on the xGW GGSN, we do not need to apply for the following resource: ( ).
A.GTP-C/U IP address
B.CG-agent IP address
C.IP Pool
D.SLB IP address
[多选题]xGW GGSN扩容GSU单板时,可能需要哪些节点配合修改数据?
While expanding the GSU board on the xGW GGSN, we probably need to modify data on the following nodes: ( ).
A.CG server
B.SGSN
C.Gi firewall
D.HLR
[判断题]扩容xGW GGSN GSU,肯定与计费服务器没有关系,CG无需做修改。
GSU expansion on the xGW GGSN is not related to the CG server, so no modification needs to be made on the CG.
A.正确
B.错误
[单选题]xGW GGSN扩容GSU时,应该把新增GSU放在()槽位。
During GSU expansion on the xGW GGSN, we should place the new GSU in slot ( ).
A.14-15
B.16-19
C.6-13
D.0-3
[判断题]扩容xGW GGSN GSU,肯定与计费服务器没有关系,CG无需做修改。
A.正确
B.错误
[单选题]xGW GGSN扩容GSU时,必须首先进行的步骤是()。
During GSU expansion on the xGW GGSN, we need to perform the following step first: ( ).
A.拔出备用MPU
Remove the standby MPU
B.插上新增GSU
Install the new GSU
C.修改GGSN配置数据
Modify GGSN configuration
D.修改CG配置数据 Modify CG configuration
[判断题]xGW GGSN更换PFU单板时,原槽位只能插入相同型号的PFU单板,子卡也必须完全相同,否则可能造成配置数据丢失。
During replacement of the PFU board on the xGW GGSN, the original slot can only be installed with a PFU board of the same model with the same sub-card. Otherwise, the configuration data will be lost.
A.正确
B.错误
[多选题]xGW GGSN某GSU CPU(Group 2/1)规划的GTP地址为220.206.184.129,配置命令为( )。
To set the GTP address of the CPU group 2/1 on a GSU of the xGW, we need to run the following commands: ( ).
A.gtpc-ip-address 220.206.184.129 vrf Gnvrf 2/1
B.gtpu-ip-address 220.206.184.129 vrf Gnvrf 2/1
C.gtp-ip-address 220.206.184.129 vrf Gnvrf 2/1
D.virtual-gtp-ip-address 220.206.184.129 vrf Gnvrf 2/1
E.
F.14
G.12
H.gtpc gtpu
[判断题]xGW GGSN GSU单板的某个CPU发生硬件故障,需要更换备件,应先将该GSU板上所有CPU倒换为备用状态。
When a hardware fault occurs to the GSU board of the xGW GGSN and we need to replace the GSU board, we should first switch all CPUs on this GSU board to the standby state.
A.正确
B.错误
[判断题]xGW GGSN GSU单板正常运行时,RUN灯常亮,ALM灯熄灭。
A.正确
B.错误
[单选题]xGW GGSN扩容前的准备工作不包括()。
Before xGW GGSN expansion, which of the following items is not included in preparation work?
A.检查新增单板固件版本
Check the firmware version of the new board.
B.配置数据备份
Back up configuration data.
C.基本业务测试
Perform basic service test.
D.检查CG磁阵剩余空间大小
Check the size of remaining space size on the CG disk array.
[判断题]xGW GGSN GSU单板正常运行时,RUN灯常亮,ALM灯熄灭。
When the GSU board of the xGW GGSN works in normal state, the RUN indicator is always on and the ALM indicator is off.
A.正确
B.错误
[判断题]xGW GGSN扩容之前,建议拔出备用MPU,目的是扩容失败时可以迅速倒回。
A.正确
B.错误
[判断题]xGW GGSN扩容之前,建议拔出备用MPU,目的是扩容失败时可以迅速倒回。
Before expansion of the xGW GGSN, it is recommended to remove the standby MPU, so that we can roll back quickly if the expansion fails.
A.正确
B.错误
[单选题]ZXUN-xGW GGSN一块GSU单板最多可以配置( )个CPU。
A.8
B.6
C.4
D.2
[单选题]ZXUN-xGW GGSN一块GSU单板最多可以配置( )个CPU。
On the ZXUN-xGW GGSN, one GSU board can be configured with ( ) CPUs at most.
A.8
B.6
C.4
D.2