更多"[单选题]GSU和()的单板运行正常是需要基于MML的group配置成"的相关试题:
[单选题]GSU和()的单板运行正常是需要基于MML的group配置成功, 即先需要配置group,将相应的GSU、CSU的CPU加入到该group中。
A.MPU
B.CSU
C.SFU
D.GSU
[多选题]单板()运行正常是需要基于MML的group配置成功。
To make the ( ) boards run properly, we need to make sure that the group configuration through MML has been completed successfully.
A.GSU
B.CSU
C.PFU
D.SFU
[多选题]xGW GGSN采用多地址方式时,GSU Group上需要配置的IP地址包括()。
When xGW GGSN adopts the multi-address mode, the following IP addresses should be configured on the GSU Group: ( ).
A.GTPC
B.GTPU
C.cgagent
D.virtual-gtp
[单选题]对于xGW PDSN,启用MIP的局点,需要为每个GSU Group配置()MIP业务地址。
A.1
B.2
C.3
D.0
[单选题]xGW PDSN,启用L2TP的局点,至少需要为每个GSU Group增加()L2TP业务IP地址。
A.1
B.2
C.3
D.0
[判断题]当只有一块GSU板,且SGW和PGW分别只配置一个CPU时,不需要配置group。
A.正确
B.错误
[填空题]华为基站数据配置执行 MML 命令 ADD ( ),增加基站单板。
[判断题]无源单板就是不需要电源的单板,日常维护可以随意掉电。
The passive board is the board that requires no power supply and the power can be cut off at will during the routine maintenance.
A.正确
B.错误
[判断题]USUP单板采用单地址方案,所有USUP_GPRS模块配置相同的IP地址,备用单板的不需要增加板号。
The single-address plan is used on the USUP board. That is, all USUP_GPRS modules are configured with the same IP address, and we do not need to add the board module for the slave board.
A.正确
B.错误
[判断题]( )单板效率是基于该塔板理论增浓程度的概念。
A.正确
B.错误
[多选题]在进行xGW的MPU单板的boot升级或者降级后,重启MPU单板之前,需要进行的操作是?( )
A.Format “/DATA0”
B.Format “/DATA1”
C.FlashReInitial
D.在串口模式下输入write
[多选题]xGW GGSN某GSU CPU(Group 2/1)规划的GTP地址为220.206.184.129,配置命令为( )。
To set the GTP address of the CPU group 2/1 on a GSU of the xGW, we need to run the following commands: ( ).
A.gtpc-ip-address 220.206.184.129 vrf Gnvrf 2/1
B.gtpu-ip-address 220.206.184.129 vrf Gnvrf 2/1
C.gtp-ip-address 220.206.184.129 vrf Gnvrf 2/1
D.virtual-gtp-ip-address 220.206.184.129 vrf Gnvrf 2/1
E.
F.14
G.12
H.gtpc gtpu
[多选题]xGW GGSN扩容GSU单板时,需要申请的资源包括()。
While expanding the GSU board on the xGW GGSN, we need to apply for the following resources: ( ).
A.GTP-C/U地址
GTP-C/U address
B.CG-agent地址
CG-agent address
C.IP 地址池
IP pool
D.SLB地址
SLB address