更多"[单选题] 配置交换机SWA 上的接口Ethernet1/0/1 为边"的相关试题:
[单选题]配置交换机SWA 上的接口Ethernet1/0/1 为边缘端口的命令为 。
A.[SWA] stp enable edged-port
B.[SWA-Ethernet1/0/1] stp enable edged-port
C.[SWA] stp edged-port enable
D.[SWA-Ethernet1/0/1] stp edged-port enable
[多选题]42
交换机SWA使用出厂缺省配置现在要把交换机SWA的Ethernet 1/0/1端口配置为Trunk端口,PVID
为VLAN20,且允许VLAN10 下面的配置过程正确的是_
A.[SWA]vlan10 [SWA-vlan10]quit [SWA]vlan 20
[SWA-vlan20]port Ethernet 1/0/1 [SWA-vlan20]quit [SWA]interface Ethernet 1/0/1
[SWA-Ethernet1/0/1]port link-type trunk [SWA-Ethernet1/0/1]port trunk permit vlan 10
B.[SWA]vlan10 [SWA-vlan10]quit [SWA]vlan 20 [SWA-vlan20]quit
[SWA]interface Ethernet 1/0/1
[SWA-Ethernet1/0/1]port access vlan 20 [SWA-Ethernet1/0/1]port link-type trunk [SWA-Ethernet1/0/1]port
Trunk permit vlan 10
C.[SWA]vlan10 [SWA-vlan10]quit [SWA]vian 20 [SWA-vlan20]quit
[SWA]interface Ethernet 1/0/1
[SWA-Ethernet1/0/1]port link-type trunk [SWA-Ethernet1/0/1]port trunk pvid vlan 20
[SWA-Ethernet1 /0/1 ]port trunk permit vlan 10
D.[SWA]interfaceEthernet 1/0/1
[SWA-Ethernet1/0/1]port link-type trunk [SWA-Ethernet1/0/1]port trunk pvid vlan 20 [SWA-Ethernet1/0/1]port trunk permit vlan 10 [SWA-Ethernet1/0/1]quit [SWA]vlan 10
[SWA-vlan10]quit[SWA]vlan 20
[单选题]41
交换机SWA的Ethernets端口配置如下:
Interface Ethernet 1/0/1 port link-type trunk
Port trunk permit vlan 10 port trunk pvid vlan 20
现在要把交换机SWA的Ethernet1/0/1端口修改为Hybrid端口,PVID为VLAN20,且在发送VLAN20的
数据帧是不打标签,在发送VLAN 10的数据帧打标签,则下面的配置过程正确的是 (选择一项或多项)
A.[SWA-Ethernet1/0/1]port link-type access [SWA-Ethernet1/0/1]port access vlan 20 [SWA-Ethernet1/0/1]port link-type hybrid
[SWA-Ethernet1/0/1]port hybrid vlan 10 tagged
B.[SWA-Ethernet1/0/1]portlink-type access [SWA-Ethernet1/0/1]port link-type hybrid
[SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged
C.[SWA-Ethernet1/0/1]undoportlink-type [SWA-Ethernet1 /0/1 ]portlink-type
Hybrid[SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged
D.[SWA-Ethernet1/0/1]port link-type hybrid
E.以上各项均不正确
[单选题] 交换机SWA 的端口Ethernet1/0/24 已经配置成为Trunk 端口类型。如果要使此端口允许VLAN 2 和VLAN 3 通过,则需要使用下列哪个命令?( )。
A.[SWA]port trunk permit vlan 2 3
B.[SWA-Ethernet1/0/24]port trunk permit vlan 2 3
C.[SWA]undo port trunk permit vlan 1
D.[SWA-Ethernet1/0/24]undo port trunk permit vlan 2
* trunk类型的接口允许多个VLAN通过,如果想要设置所允许通过的VLAN,就需要在接口视图下用undo trunk permit vlan 2 3。
[单选题]交换机SWA 的端口Ethernet1/0/24 已经配置成为Trunk 端口类型。如果要使此端口允许VLAN 2 和VLAN 3 通过,则需要使用下列哪个命令? 。
A.[SWA]port trunk permit vlan 2 3
B.[SWA-Ethernet1/0/24]port trunk permit vlan 2 3
C.[SWA]undo port trunk permit vlan 1
D.[SWA-Ethernet1/0/24]undo port trunk permit vlan 2
[多选题]38
要把交换机SWA的Ethernet1/0/1端口配置为Hybrid端口,其PVID为VLAN20,且在发送VLAN20
的数据帧时不打标签,在发送VLAN 10的数据帧时打标签,则下面的配置过程正确的是 (选择一项或多项)
A.[SWA]vlan10 [SWA-vlan 10]quit [SWA]vlan 20
[SWA-vlan20]port Ethernet 1/0/1 [SWA-vlan20]quit [SWA]interface Ethernet 1/0/1
[SWA-Ethernet1 /0/1 ]port link-type hybrid [SWA-Ethernet1 /0/1]port hybridvlan 10 tagged
B.[SWA]vlan10 [SWA-vlan 10]quit [SWA]vlan 20 [SWA-vlan20]quit
[SWA]interface Ethernet 1/0/1
[SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20
[SWA-Ethernet1 /0/1 ]port hybrid vlan 10 tagged
C.[SWA]vlan10 [SWA-vlan10]quit [SWA]vlan 20 [SWA-vlan20]quit
[SWA]interface Ethernet 1/0/1
[SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20
[SWA-Ethernet1/0/1]port hybrid vlan 10 tagged [SWA-Ethernet1 /0/1 ]port hybrid vlan 20 untagged
D.[SWA]interfaceEthernet 1/0/1
[SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20
[SWA-Ethernet1/0/1]port hybrid vlan 10 tagged [SWA-Ethernet1/0/1]port hybrid vlan 20 untagged [SWA-Ethernet1/0/1]quit
[SWA]vlan 10
[SWA-vlan10]quit[SWA]vlan 20
E.以上各项均不正确
[单选题] 根据用户需求,管理员需要将交换机SWA 的端口Ethernet1/0/1 配置为Trunk 端口。下列哪个命令是正确的配置命令?( )。
A. [SWA] port link-type trunk
B. [SWA-Ethernet1/0/1] port link-type trunk
C. [SWA] undo port link-type access
D. [SWA-Ethernet1/0/1] undo port link-type access
* 想让某个端口的模式改为trunk,就必须在端口视图下面进行操作,所以排除AC;又因为D前面加了一个undo,它的意思是删除/撤销。所以正确答案是B。
[单选题]根据用户需求,管理员需要将交换机SWA 的端口Ethernet1/0/1 配置为Trunk 端口。下列哪个命令是正确的配置命令? 。
A.[SWA] port link-type trunk
B.[SWA-Ethernet1/0/1] port link-type trunk
C.[SWA] undo port link-type access
D.[SWA-Ethernet1/0/1] undo port link-type access
[单选题] 交换机SWA 的端口Ethernet1/0/1 原来是Access 端口类型,现在需要将其配置为Hybrid 端口类型。下列哪个命令是正确的配置命令?( )。
A. [SWA] port link-type hybrid
B. [SWA-Ethernet1/0/1] port link-type hybrid
C. [SWA] undo port link-type trunk
D. [SWA-Ethernet1/0/1] undo port link-type trunk
* 改变交换机某个端口的模式,如果原来处于access类型,那么直接可以改为hybrid类型,如果是trunk类型,先改为access类型然后再改为hybrid类型。
[单选题]交换机SWA 的端口Ethernet1/0/1 原来是Access 端口类型,现在需要将其配置为Hybrid 端口类型。下列哪个命令是正确的配置命令? 。
A.[SWA] port link-type hybrid
B.[SWA-Ethernet1/0/1] port link-type hybrid
C.[SWA] undo port link-type trunk
D.[SWA-Ethernet1/0/1] undo port link-type trunk
[多选题]54
交换机SWA 的端口 Ethemet1/0/1、Ethernet1/0/2 和 Ethernet1/0/3 分别为 Access、Trunk和 Hybrid 端口,
PVID都为VLAN10在SWA上执行命令undo vlan10后,査看各端口配置可以看到下列哪-配置
A.interfaceEthernet1/0/1
B.interfaceEthernet1/0/1 port access vlan 10
C.interface Ethernet 1/0/2 port link-type trunk port trunk permit vlan 1
D.interface Ethernet 1/0/2 port link-type trunk port trunk permit vlan 1 port trunk pvid vlan 10
E.interfaceEthernet1/0/3 port link-type hybrid port hybrid vlan 1 untagged
F.interfaceEthernet1/0/3 port link-type hybrid port hybrid vlan 1 untagged port hybrid pvid vlan 10
G.以上配置全部有误
[多选题]98
在交换机SWA上执行displayinterface Ethernet 1/0/1命令后,输出信息如下:
[SWA]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec) Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q Port priority: 0
从以上输出可以判断
A.端口Ethernetl/0/1是一个Trunk端口,允许所有VLAN的数据侦通过
B.带有VLAN1标签的数据帧离开端口Ethernetl/0/1时会被剥离标签
C.带有VLAN20标签的数据帧可以从端口Ethernetl/0/1转发出去
D.带有VLAN10标签的数据帧进入端口Ethernetl/0/1时不会被丢弃
[多选题]78
在交换机SWA上执行displayinterface Ethernet 1/0/1命令后,输出信息如下:
[SWA]display interface Ethernet 1/0/1 Ethernet1/0/1 current state: UP PVID: 10
Mdi type: auto
Link delay is 0(sec) Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q Port priority: 0
从以上输出可以判断
A.端口Ethemetl/OM是一个Trunk端口,只允许VLAN 1和VLAN 10的数据侦通过
B.不带VLAN标签的数据帧进入端口Ethernet1/0/1时会被打上VLAN1的标签
C.带有VLAN1标签的数据侦离开端口Ethemet1/0/1时不会被剥离标签
D.端口Ethemet1/0/1是一个Trunk端口,允许任意VLAN的数据帧通过
[多选题] PCA、PCB 分别与S3610 交换机SWA 的端口Ethernet1/0/2、Ethernet1/0/3 相连,服务器与端口Ethernet1/0/1 相连。如果使用端口隔离技术使PC 间互相隔离,但PC 都能够访问服务器,则需要在交换机上配置哪些命令?( )。
A.[SWA] port-isolate enable
B. [SWA-Ethernet1/0/2] port-isolate enable
C.[SWA-Ethernet1/0/3] port-isolate enable
D.[SWA-Ethernet1/0/1] port-isolate uplink-port
* 要想PC之间实现隔离而PC和服务器之间能够访问,那么PC之间进行二层隔离,而服务器所连的那个端口设置为上行端口(uplink-port),注意应在接口视图下用:port-isolate uplink-port。
[单选题] 交换机SWA 的端口Ethernet1/0/4 连接有一台路由器。管理员想在此端口上关闭生成树功能,则需要用到如下哪个命令?( )。
A. [SWA] stp disable
B. [SWA-Ethernet1/0/4] stp disable
C. [SWA] undo stp enable
D. [SWA-Ethernet1/0/4] undo stp enable
* 想要在端口上关闭生成树协议,就必须在接口视图中用STP disable。
[单选题]交换机SWA 的端口Ethernet1/0/4 连接有一台路由器。管理员想在此端口上关闭生成树功能,则需要用到如下哪个命令? 。
A.[SWA] stp disable
B.[SWA-Ethernet1/0/4] stp disable
C.[SWA] undo stp enable
D.[SWA-Ethernet1/0/4] undo stp enable
[多选题]100
在交换机SWA上执行display interface Ethernet 1/0/1命令后,输出信息如下:
[SWA]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec) Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q Port priority: 0
从以上输出可以判断
A.带有VLAN10标签的数据帧离开端口 Ethemet1/0/1时会被剥离标签
B.带有VLAN20标签的数据帧不能从端口Ethemetl/O/1转发出去
C.带有VLAN1标签的数据侦进入端口Ethemet1/0/1时会被丢弃
D.带有VLAN10标签的数据帧进入端口 Ethernet1/0/1时会被丢弃
[多选题]99
在交换机SWA上执行display interface Ethernet 1/0/1命令后,输出信息如下:
[SWA]display interface Ethernet 1/0/1 Ethernetl/0/1 current state: UP
PVID: 10
Mdi type: auto
Link delay is 0(sec) Port link-type: trunk
VLAN passing: 1 (default vlan), 10
VLAN permitted: 1 (default vlan), 2-4094 Trunk port encapsulation: IEEE 802.1q Port priority: 0
从以上输出可以判断
A.端口Ethernetl/0?是一个Trunk端口,只允许VLAN 10的数据帧通过
B.不带VLAN标签的数据帧进入端口Ethernet1/0/1时会被打上VLAN10的标签
C.带有VLAN1标签的数据帧进入端 Ethernet1/0/1时不会被丢弃
D.带有VLAN10标签的数据帧Ethernetl/0/1时不会被剥离标签
[多选题]32
主机 PCA、PCB 和 PCC 分别连接接在交换机 SWA 的 Ethernet1/0/1 Ethernet1/0/2 和 Ethernet1/0/3
端口上,并且其地址处于同一网段,在SWA上査看VLAN有如下显示:
[SWA]display vlan 10
VLAN ID: 10
VLAN Type: static
Route Interface: not configured Description: VLAN 0010
Name: VLAN 0010
Tagged Ports: none Untagged Ports: Ethernet1/0/1 Ethernet1/0/24 [SWA]display vlan 20
VLAN ID: 20
VLAN Type: static
Route Interface: not configured Description: VLAN 0020
Name: VLAN 0020
Tagged Ports: none Untagged Ports:
Ethernet1/0/2Ethernet1/0/24 [SWA]display vlan 30
VLAN ID: 30
VLAN Type: static
Route Interface: not configured Description: VLAN 0030
Name: VLAN 0030
Tagged Ports: none Untagged Ports:
Ethernetl/0/1 Ethernetl/0/2 Ethernet1/0/24
从以上输出信息可以判断
A.PCA可以和PCB互通
B.PCA可以和PCC互通
C.PCB可以和PCC互通
D.PCA、PCB和PCC之间两两不能互通