更多"[多选题]xGW GGSN启用xDPI功能时,需要增加/修改的配置数据"的相关试题:
[单选题]xGW PDSN,启用L2TP的局点,至少需要为每个GSU Group增加()L2TP业务IP地址。
A.1
B.2
C.3
D.0
[多选题]xGW GGSN采用多地址方式时,哪些组上需要配置IP地址?
When xGW GGSN adopts the multi-address mode, the following groups should configure IP addresses: ( ).
A.GSU Group
B.CU Group
C.SLB Group
D.xDPI Group
[判断题]对于xGW PDSN, 启用VRF的局,如果该VRF内存在L2TP业务,需要为每个GSU Group 增加该VRF对应的L2TP业务地址。
For the xGW PDSN that has been enabled with the VRF, if there is L2TP service in this VRF, we need to add the corresponding L2TP service IP addresses corresponding to this VRF for each GSU group.
A.正确
B.错误
[单选题]对于xGW PDSN,启用MIP的局点,需要为每个GSU Group配置()MIP业务地址。
A.1
B.2
C.3
D.0
[单选题]xGW GGSN开启哪项功能时,不需要申请新的License?
When the ( ) function is enabled on the uMAC GGSN, we do not need to apply for a new license.
A.xDPI
B.PCC
C.Lawful Interception
D.以上都不是
None of the above
[单选题]xGW同LIG进行对接时,需要哪些地址互通?( )
When the xGW interconnects with the LIG, it needs to communicate with the following IP addresses: ( ).
A.需要同LIG的1/2口互通就可以了。
It only needs to communicate with X1 and X2 interfaces of the LIG.
B.需要同LIG的1/2互通,LIG的3口媒体面互通。
It needs to communicate with X1 and X2 interfaces of the LIG, and the media plane of X3 interface on the LIG.
C.需要同LIG的1/2口互通,LIG的3口信令面互通。
It needs to communicate with X1 and X2 interfaces of the LIG, and the signaling plane of X3 interface on the LIG.
D.需要同LIG的1/2口互通,LIG的3口信令和媒体面都要互通。
It needs to communicate with X1 and X2 interfaces of the LIG, and signaling and media planes of X3 interface on the LIG.
[单选题]xGW PDSN 与PCF对接时,仅需要告诉对方()的地址。
When the xGW PDSN interconnects with the PCF, it only needs to notify the opposite office of the ( ) address.
A.SLB
B.MPU
C.PFU
D.GSU
[判断题]xGW GGSN中,开启DT功能时,必须申请新的License。
When the DT function is enabled on the uMAC GGSN, we must apply for a new license.
A.正确
B.错误
[单选题]xGW GGSN一般不需要对接的设备是()。
xGW GGSN generally does not need to connect to ( ).
A.OCS
B.PCRF
C.SGSN
D.HLR
[多选题]xGW(PDSN)对接EMS,以下服务必须开启的有()。
When the xGW (PDSN) interconnects with the EMS, the following services must be enabled: ( ).
A.ftp
B.ssh
C.snmp
D.ntp
E.
F.1234
G.13
H.ftp snmp
[单选题]xGW GGSN中,需要把手机地址池平均分配到()上。
In xGW GGSN, addresses in the IP address pool of MS must be assigned to ( ) averagely.
A.GSU Group
B.CU Group
C.SLB Group
D.xDPI Group
[单选题]PCF同xGW-PDSN进行对接,需要增加安全关联的配置是()。
A.RP real IP同PCF业务地址之间建立RP secure关联
B.RP virtual IP同PCF业务地址之间建立RP secure关联
C.RP real IP 和 RP virtual IP都需要同PCF业务地址之间建立RP secure关联
D.以上都不对
[多选题]在xGW前台与ZXUN-eCG对接时,xGW需要分别配置( )地址和( )地址。
When the xGW foreground interconnects with the ZXUN-eCG, the following two addresses should be configured on the xGW: ( ).
A.PFU接口板地址
PFU interface IP address
B.CG-AGENT地址
CG-AGENT IP address
C.CG Client地址
CG Client IP address
D.USI板接口地址
USI interface IP address