更多"[单选题]If a pilot keeps pressing take"的相关试题:
[单选题]CVR ERASE pushbutton:
A. is pressed on the air to directly erase
B. is pressed on the ground to directly erase
C. is pressed on the ground and the parking brake is on
[单选题]CVR TEST pushbutton:
A. is pressed and voice prompt is on
B. is pressed when the aircraft is powered on and low frequency signal or pulse sound is on
C. is pressed when the aircraft is powered on and there’s no sound if the parking brake is off
[单选题]When the BLOWER or EXTRACT pushbutton switch is set at the OVRD position, the system is in:
A.close-circuit configuration
B.intermediary
C.open-circuit configuration
[单选题]When NAV pushbutton on RMP is pressed:
A. Navigation receivers and courses will be selected through the RMP
B. Radios and their frequencies will be taken over by other receivers
C. Radios and their frequencies will be off-work provisionally
[单选题]When the blue electric pump pushbutton is set on AUTO, if the AC power is available, the electric pump operates:
A. In flight
B. On the ground, if one engine is running or if the crew has pressed the BLUE PUMP OVRD pushbutton
C. Both A and B are correct
[单选题]Hot AIR pushbutton is at OFF position：
A. Valve regulate HP pressure
B. Valve opens, and air regulation valve closes
C. Valve closes, and air regulation valve opens
[单选题]Press the MECH pushbutton on Audio Control Panel (ACP) to:
A. communicate with ground mechanics by headset
B. communicate with ground air crew by ACP intercommunication pushbutton
C. communicate with ground air crew by ACP pushbutton
[单选题]If interphone pushbutton is selected on ACP:
A. it can be received only by headset
B. the volume of the loudspeaker is smaller
C. the volume of the loudspeaker is under normal function
[单选题]What’s the function of RESET pushbutton
A. restart the system
B. cancel the original selection
C. cancel all flashing call lights
[单选题]What is the function of AIDS PRINT pushbutton of Aircraft Integrated Data System(AIDS)？
A. A specific report depending on different flight phases can be immediately printed
B. Event marker can be set in flight data record
C. It is used for the convenience of maintenance
[单选题]Amber FAULT light on MODE SEL pushbutton of fuel mode will turn on when：
A. Fuel feed pressure descends
B. CTR is above 250kg, any wing tank is below 5000kg
C. Two CTR Pumps selects OFF position
[单选题]How do you cancel NAV after NAV pushbutton on RMP is pressed?
A. press the button again
B. switch off the power and then connect it
C. it cannot be canceled; select other RMP to control it
[单选题]On fuel X FEED pushbutton, white ON light means
A. valve is completely open
B. valve is closed
C. valve is in transient process
[单选题]LOC pushbutton on FCU is pressed to arm LOC mode, which is used for:
A. setting published LOC approach
B. approach without glide slope
C. Both A and B are correct
[单选题]When do you press the RAT MAN ON pushbutton to extend the RAT?
A. Only in flight
B. Only on the ground
C. At any time
[单选题]MODE SEL pushbutton sw of fuel mode is at AUTO position, they stop automatically ( ) after center tank low level is reached.
A. 2 minutes
B. 5 minutes
C. 10 minutes
[单选题]If both pilots press their takeover pushbuttons, which pilot can get priority.
A. the pilot that presses last
B. the pilot that presses first
C. they have the same priority and the system adds the signals
[单选题]Pilot incapacity definition
A.In aviation industry, the pilot incapacity is defined as a certain physical or psychological situation which affects pilot’s capability of performing the designated task in flight
B.In aviation industry, the pilot incapacity is defined as a certain physical or psychological situation that has no affection on pilot’s capability of performing the designated task in flight
C.Pilot incapacity is usually defined as some physical situations which affect pilot’s capability of performing the designated task in flight
[单选题]Pilot incapacity usually happen in
A.elder pilots
B.critical flight phases
C.all ages and all flight phases
