[判断题]GGSN上线前，需要检查R_PPPLCPDATA，要求配置成6万。 Before the GGSN gets online, we need to check R_PPPLCPDATA. It should be configured as 60000.
A.正确
B.错误

[单选题]GGSN上线前，需要检查R_PPPLCPDATA，要求配置成（）。 Before the GGSN gets online, we need to check R_PPPLCPDATA, which should be configured as ().
A.30000
B.40000
C.50000
D.60000

[判断题]GGSN上线前，需要检查R_PPPLCPDATA，要求配置成6万。
A.正确
B.错误

[单选题]xGW GGSN扩容前的准备工作不包括（）。 Before xGW GGSN expansion, which of the following items is not included in preparation work?
A.检查新增单板固件版本 Check the firmware version of the new board.
B.配置数据备份 Back up configuration data.
C.基本业务测试 Perform basic service test.
D.检查CG磁阵剩余空间大小 Check the size of remaining space size on the CG disk array.

[多选题]在GGSN系统割接前，需要进行主备倒换测试，包括以下（）。 Before cutover of the GGSN system, we need to perform active/standby switchover tests, including: ( ).
A.MPU单板主备倒换测试。 Master/slave MPU board switchover test
B.GSU 单板主备倒换测试. Master/slave GSU board switchover test
C.CSU 单板主备倒换测试. Master/slave CSU board switchover test
D.CG双机主备倒换测试. CG dual-computer active/standby test

[多选题]GGSN上线之前，需要检查SNMP配置，下面说法正确的是（）。 Before online GGSN, need to check the SNMP configuration, which statements are correct?
A.snmp-server host vrf mng 配置了EMS的地址。 Configure the EMS ip address in snmp-server host vrf mng.
B.snmp-server trap-source配置了xGW的管理口地址。 Configure the xGW manager interface ip in snmp-server trap-source.
C.snmp-server community配置了读串和写串。 Configure the read&write string in snmp-server community.
D.snmp-server user配置了不同权限的用户。 Configure the users with different kind of privilege.

[单选题]GGSN上线之前，需要检查SNMP配置，下面说法不正确的是（）。 Before the GGSN system gets online, we need to check SNMP configurations. Which of the following statements is correct? ( )
A.snmp-server host vrf mng 配置了EMS的地址。 Set "snmp-server host vrf mng" to the IP address of the EMS.
B.snmp-server trap-source配置了xGW的管理口地址。 Set "snmp-server trap-source" to the IP address of the management on the xGW.
C.snmp-server community配置了读串和写串。 Set "snmp-server community" to reading and writing strings.
D.snmp-server user配置了不同权限的用户。 Set "snmp-server user" to users with different rights.

[多选题]xGW GGSN扩容前，必须备份MPU上的数据，包括文件夹（）。 Before expanding the xGW GGSN, we must back up data on the MPU, including the following folders: ( ).
A.DATA0
B.DATA1
C.config
D.vmm

[多选题]xGW GGSN进行改造前，必须备份MPU上的数据，包括文件夹（）。 Before reconstruction of the xGW GGSN, we must back up data on the MPU, including the following folders: ( ).
A.DATA0
B.DATA1
C.config
D.vmm

[单选题]所有信息系统.基础平台.设备(终端)上线前必须按照公司要求修改( )后方可投运。
A.系统配置
B.防护配置
C.管理权限
D.默认口令

[判断题]xGW GGSN扩容之前，建议拔出备用MPU，目的是扩容失败时可以迅速倒回。 Before expansion of the xGW GGSN, it is recommended to remove the standby MPU, so that we can roll back quickly if the expansion fails.
A.正确
B.错误

[多选题]xGW GGSN割接上线前，需要检查PDP最大空闲时间（idle-time）设置，下面说法正确的是（）。 Before xGW GGSN cutover, need to check the PDP idle-time configuration, which statements are correct?
A.固定设置成1000MIN。 Idle-time should fix to 1000 min.
B.如果新建xGW GGSN是为了替换我司V3 GGSN，则要求xGW的idle-time设置和V3 GGSN保持一致。 If the new GGSN is for replacing ZTE old V3 GGSN, then idle-time value should be same with old V3 GGSN.
C.如果不是替换我司V3 GGSN，则要求和局方现网设置保持一致。 If the new GGSN isn't for replacing ZTE old V3 GGSN, then idle-time value should be same with current network.
D.如果不是替换我司V3 GGSN，局方现网也没有任何GGSN设备，则可根据实际需要配置，推荐1440min。 If the new GGSN isn't for replacing ZTE old V3 GGSN and there is no any GGSN in the current network, then idle-time value should be configured according to the real requirement, and 1440min is for recommendation.

[单选题]NSA锚点站时钟同步模式要求配置成哪种方式
A.GPS相位同步
B.2MBIT
C.1588频率同步
D.2Mbits

[单选题]8．NSA锚点站时钟同步模式要求配置成哪种方式? (-）
A.A．GPS相位同步
B.B．2MBIT
C.C．1588频率同步
D.D．2mbits

[判断题]V4 SGSN的Ga物理接口需要配置成负荷分担模式。 The Ga physical interface of V4 SGSN should be set to the load sharing mode.
A.正确
B.错误

[判断题]外单位工程车首次上线前，需向运营公司备案， 通过审批后方可安排上线作业。
A.正确
B.错误

[判断题]班前安全教育及上线前试通话时，必须通报防护员姓名。
A.正确
B.错误