更多"[多选题]Which three of these statement"的相关试题:
[多选题]
Which two of these statements regarding RSTP are correct? (Choose two.)
A. RSTP cannot operate with PVST+.
B. RSTP defines new port roles.
C. RSTP defines no new port states.
D. RSTP is a proprietary implementation of IEEE 802..1.D STP.
E. RSTP is compatible with the original IEEE 802..1.D STP.
[多选题]Which three statements are typical characteristics of VLAN arrangements? (Choose three.)
A. A new switch has no VLANs configured.
B. Connectivity between VLANs requires a Layer 3. device.
C. VLANs typically decrease the number of collision domains.
D. Each VLAN uses a separate address space.
E. A switch maintains a separate bridging table for each VLAN.
F. VLANs cannot span multiple switches.
[多选题]
Which three statements accurately describe layer 2. Ethernet switches?(choose three)
A. Microsegmentation decreases the number of collisions on the network.
B. if a switch receives a frame for an unkown destination,it uses ARP to resolve the address.
C. Spanning Tree Protocol allows switches to automatically share vlan information.
D. In a properly functioning network with redundant switched paths,each switched aegment will contain oneroot bridge with all its ports in the forwarding state.All other switches in that broadcast domain will haveonly one root port.
E. Establishing vlans increases the number of broadcast domains.
F. Switches that are configured with vlans make forwarding decisions based on both layer 2. and layer 3.address information.
[多选题]
Which three statements about VTP features are true?(choose three)
A. When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies
B. Each broadcast domain on a switch can have its own unique VTP domain
C. VTP works at Layer 3. of the OSI model and requires that a management VLAN IP address beconfigured.
D. When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk linknegotiation.
E. VTP pruning is used to increase available bandwidth in trunk links
F. Client,server,and transparent are valid VTP modes
G. To configure a switch to be part of two VTP domains,each domain must have its own passwords
[多选题]
Refer to the exhibit. Which three statements are true about how router JAX will choose a path to the
A. By default, if RIPv2. is the routing protocol, only the path JAX-ORL will be installed into the routing table.
B. The equal cost paths JAX-CHI-ORL and JAX- NY-ORL will be installed in the routing table if RIPv2. isthe routing protocol.
C. When EIGRP is the routing protocol, only the path JAX-ORL will be installed in the routing table bydefault.
D. When EIGRP is the routing protocol, the equal cost paths JAX-CHI-ORL, and JAX-NY-ORL will beinstalled in the routing table by default.
E. With EIGRP and OSPF both running on the network with their default configurations, the EIGRP pathswill be installed in the routing table.
F. The OSPF paths will be installed in the routing table, if EIGRP and OSPF are both running on the
Network with their default configurations.
[多选题]
Refer to the diagram. Which three statements describe the router port configuration and the switch portconfiguration as shown in the topology? (Choose three.)
A. The Router1. WAN port is configured as a trunking port.
B. The Router1. port connected to Switch1. is configured using subinterfaces.
C. The Router1. port connected to Switch1. is configured as 10. Mbps.
D. The Switch1. port connected to Router1. is configured as a trunking port.
E. The Switch1. port connected to Host B is configured as an access port.
F. The Switch1. port connected to Hub1. is configured as full duplex.
[多选题]
Which three statements about EIGRP are true?(choose three)
A. EIGRP converges fast RIP because of DUAL and backup routes that are stored in the topology table.
B. EIGRP uses a hello protocol to establish neighbor relationships
C. EIGRP uses split horizon and reverse poisoning to avoid routing loops.
D. EIGRP uses periodic updates to exchange routing information
E. EIGRP allows routers of different manufacturers to interoperate
F. EIGRP supports VLSM and authentication for routing updates.
G. EIGRP use a broadcast address to send routing information.
[多选题]
Which three statements about RSTP are true?(choose three)
A. RSTP significantly reduces topology reconverging time after a link failure.
B. RSTP expends the STP port roles by adding the alternate and backup roles.
C. RSTP port atates are blocking,discarding,learing,or forwarding.
D. RSTP also uses the STP proprsal-agreement sequence.
E. RSTP use the same timer-baseed process as STP on point-to-point links.
F. RSTP provides a faster transition to the forwarding state on point-to-point links than STP does.
[多选题]
Which two statements are true regarding EIGRP? (Choose two.)
A. Passive routes are in the process of being calculated by DUAL.
B. EIGRP supports VLSM, route summarization, and routing update authentication.
C. EIGRP exchanges full routing table information with neighboring routers with every update.
D. If the feasible successor has a higher advertised distance than the successor route, it becomes the
Primary route.
E. A query process is used to discover a replacement for a failed route if a feasible successor is not
Identified from the current routing information.
[多选题]Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere6.5?
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
[多选题]
Which three Layer 2. encapsulation types would be used on a WAN rather than a LAN? (Choose three.)
A. HDLC
B. Ethernet
C. Token Ring
D. PPP
E. FDDI
F. Frame Relay
[多选题]
Which three approaches can be used while migrating from an IPV4. addressing scheme to an IPV6. scheme.(choose three)
A. statically map IPV4. address to IPV6. addresses
B. configuration IPv4. tunnels between IPV6. islands
C. use DHCPv6. to map IPV4. addresses to IPV6. addresses
D. use proxying and translation to translate IPV6. packets into IPV4. packets
E. configure IPV6. directly
F. enable dual-stack routing
[多选题]
Which three elements must be used when you configure a router interface for vlan trunking?(choose three)
A. one IP network or subnetwork for each subinterface
B. subinterface numbering that matches vlan tages
C. subinterface encapsulation identifiers that match vlan tags
D. a management domain for each subinterface
E. one physical interface for each subinterface
F. one subinterface per vlan
[多选题]Boot from SAN is supported on which three storage technologies?
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
[多选题]
Refer to the exhibit.Which three variables(router,protocol port,and router ACL direction)apply to an
Extended ACL that will prevent student 01. from securely browsing the internet?
A. OUT
B. Router 3.
C. HTTTP
D. IN
E. Router 1.
[多选题]
Which three are characteristics of an IPV6. anycast address?(choose three)
A. any-to-many communication model
B. delivery of packets to the group interface that is closest to the sending device
C. one-to-many communication model
D. the same address for multiple devices in the group
E. one-to-nearest communication model
F. a unique IPV6. address for each device in the group
[多选题]
Which two statements describe characteristics of IPv6. unicast addressing? (Choose two.)
A. Global addresses start with 200.0.::/3..
B. Link-local addresses start with FE00.:/12..
C. Link-local addresses start with FF00.::/10..
D. There is only one loopback address and it is ::1..
E. If a global address is assigned to an interface, then that is the only allowable address for the interface.
[多选题]
Which statements describe the routing protocol OSPF? (Choose three.)
A. It supports VLSM.
B. It is used to route between autonomous systems.
C. It confines network instability to one area of the network.
D. It increases routing overhead on the network.
E. It allows extensive control of routing updates.
F. It is simpler to configure than RIP v2..
[多选题]
Which two statements describe the advantages to the use of RIP over the use of OSPF?(choose two)
A. RIP requires less time to converge
B. RIP uses less bandwidth
C. RIP is less complex to configure
D. RIP demands fewer router resources
E. RIP has a more accurate metric