更多"[判断题]uMAC系统中,对于非独立改造为独立,只需要格式化主框的EG"的相关试题:
[判断题]uMAC系统中,对于非独立改造为独立,只需要格式化主框的EGBS和EGFS单板。
On the uMAC system, to transform non-independent boards to independent boards, we only need to format the EGBS board and the EGFS board on the main shelf.
A.正确
B.错误
[判断题]EGBS和EGFS独立信息配置,如果多框的局点,每框的EGBS和EGFS都需要在对应机框的ECMM上进行修改。
During independent information configuration of the EGBS and EGFS, in a multi-shelf office, the EGBS and EGFS boards of each shelf need to be modified on the ECMM of the corresponding shelf.
A.正确
B.错误
[判断题]EGBS和EGFS作为独立交换单板,不支持从对板获取版本启动。
When the EGBS and EGFS work as independent switching board, they do not support getting the boot file from the mate board.
A.正确
B.错误
[多选题]涉及到EGBS和EGFS的()版本,如果不升级,独立单板无法从对板启动,只支持从后台获取版本。
For ( ) versions of EGBS and EGFS, if they are not upgraded, the independent board cannot boot from its mate board, and can only support getting the boot-file from the background OMM server.
A.BOOT
B.FRU
C.SIPMC
D.EPLD
[单选题]uMAC系统中,EGFS的槽位是()。
In the uMAC system, the EGFS board is installed in following slots: ( ).
A.主备分别为9和10槽
slot 9/10 for master/slave boards
B.主备分别为21和22槽
slot 21/22 for master/slave boards
C.主备分别为5和6槽
slot 5/6 for master/slave boards
D.主备分别为29和30槽
slot 29/30 for master/slave boards
[单选题]uMAC系统中,EGBS的槽位是()。
In the uMAC system, the EGBS board is installed in following slots: ( ).
A.主备分别为9和10槽
slot 9/10 for master/slave boards
B.主备分别为21和22槽
slot 21/22 for master/slave boards
C.主备分别为5和6槽
slot 5/6 for master/slave boards
D.主备分别为29和30槽
slot 29/30 for master/slave boards
[多选题]中性点直接接地系统相对于非有效接地系统而言,存在的缺点有(____)。
A.任何部分发生单相接地故障,都必须断开电源
B. B. 巨大的接地短路电流,将产生很大的电动力、热效应
C. C. 一旦发生单相短路,断路器就跳闸,增大了断路器的维修工作量
D. D. 大的接地短路电流将引起电压急剧降低,可能导致系统暂态稳定的破坏
[多选题]3.133. 第133题
中性点直接接地系统相对于非有效接地系统而言,存在的缺点有( )。
A.任何部分发生单相接地故障,都必须断开电源
B.巨大的接地短路电流,将产生很大的电动力、热效应
C.一旦发生单相短路,断路器就跳闸,增大了断路器的维修工作量
D.大的接地短路电流将引起电压急剧降低,可能导致系统暂态稳定的破坏
[单选题]对于非独立悬架,( )是影响乘员舒适性的主要因素。
A.钢板弹簧
B.轴
C.车轮
D.轮胎
[简答题]对于单独供电的电能替代设备,宜配置独立的电能计量装置;对于非单独供电的电能替代设备,可不配置电能计量装置。
[判断题]V4 uMAC中,EGBS只能插在19、20槽位。
A.正确
B.错误
[单选题]V4 uMAC中,在EGBS上作为ECMM控制面端口是( )?
A.ETH-M
B.ETH-C1
C.HOST-232
D.ETH-MP1
[多选题]在uMAC-MME中,后插卡EGBS可以安装在哪个槽位?
A.7
B.8
C.19
D.20