[判断题]When deployed to transmission application of wavelengths up to 160 wavelengths, the ZXWM M900 performs optical amplification of signals at the C band and the L band independently at the same time.

[单项选择]Where are files queued for transmission when using the configuration archive transfer-on- commit function?（）
A. /var/config
B. /var/queue
C. /var/transfer/queue
D. /var/transfer/config

[多项选择]When defining an application for AppFlow acceleration, which two must be configured on the WX device?（）(Choose two.)
A. Define application type.
B. Enable AppFlow for the application.
C. Enable monitoring for the application.
D. Define source and destination IP addresses.

[单项选择]When IPv6 is deployed by a Service Provider to bring on an IPv6 Enterprise， which transition strategyworks the best？（）
A. Deploy IPv6 at the Edges and tunnel Enterprise through the core
B. Deploy IPv6 at Edges and Core at the same time for smooth transition
C. Deploy IPv6 at the core first and then move to Edges toward the end customer
D. None of the above will work

[单项选择]When using which application may it be necessary to deploy access points in monitor-only mode？（）
A. voip
B. rfid tags
C. data collection
D. 802.11b and g clients

[多项选择]Your company has deployed the Junos Pulse Access Control Service. The system administrator notices that the Host Checker policies are not being applied and enforced. You have verified that the controllers configuration is correct.Which two conditions are causing this issue?（）
A. The endpoint is using EAP-PEAP with EAP-GTC as the inner protocol,
B. The endpoint is using EAP-TTLS with EAP-JUAC as the inner protocol.
C. The endpoint is using EAP-FAST with EAP-GTC as the inner protocol,
D. The endpoint is using EAP-PEAP with EAP-JUAC as the inner protocol.

[单项选择]Your company has deployed network access protection (NAP) enforcement for VPNs. You need to ensure that the health of all clients can be monitored and reported. What should you do?（）
A. Create a group policy object (GPO) that enabled security center and link the policy to the domain.
B. Create a group policy object (GPO) that enabled security center and link the policy to the domain controllers organizational unit (OU).
C. Create a group policy object (GPO) and set the require trusted path for credential entry option to enabled. Link the policy to the domain.
D. Create a group policy object (GPO) and set the require trusted path for credential entry option to Enabled. Link the policy to the domain controllers organizational unit (OU).

[单项选择]Your company has deployed Network Access Protection (NAP).You configure secure wireless access to the network by using 802.1X authentication from any access point.You need to ensure that all client computers that access the network are evaluated by NAP.What should you do？（）
A. Configure all access points as RADIUS clients to the Remediation Servers.
B. Configure all access points as RADIUS clients to the Network Policy Server (NPS).
C. Create a Network Policy that defines Remote Access Server as a network connection method.
D. Create a Network Policy that specifies EAP-TLS as the only available authentication method.

[单项选择]One of your customers has deployed a Layer 3 gateway in the untrusted network. Which gateway mode is appropriate for this customer?（）
A. Virtual Gateway
B. Real-IP Gateway
C. NAT Gateway
D. Central Gateway

[单项选择]At a branch location, TestKing.com has deployed a non modular router that is equipped with two serial interfaces and two Ethernet interfaces.What additional equipment must be used to allow the branch office to connect to the central office by using an ISDN service?（）
A. a serial cable with a V.35 to RJ45 adapter
B. a CSU/DSU
C. an external ISDN TA and NT1
D. The non-modular router cannot connect to an ISDN service. The network administrator must purchase a modular router with an ISDN BRI-U card.

[单项选择]You create an application. The application processes hundreds of XML documents per minute. The XML documents are validated against inline schemas. You need to load XML documents from the file system and read them as quickly as possible. XML comments must be ignored while reading the XML documents.What should you do? （）
A. Create an instance of the XmlReader class by using the XmlReader Create method with an instance of the XmlReaderSettings class.
B. Create an instance of the XmlReader class with an instance of the XmlTextReader class.
C. Create an instance of the XmlDocument class and specify a location for the application schema.
D. Create an instance of the XmlReader class with an instance of the XmlNodeReader class.

[单项选择]The general ordered that his forces be deployed immediately.
A. moved
B. gathered
C. employed
D. spread out

[单项选择]Your company has recently deployed a server that runs windows server 2008. The server has the ip information shown below.Ip address 192.168.46.186Subnet mask: 255.255.255.192Default gateway: 192.168.46.1Users on remote subnets report that they are unable to connect to the server.You need to ensure all users are able to connect to the server.What should you do?（）
A. Change the IP address to192.168.46.129
B. Change the IPaddress to192.168.46.200
C. Change thes ubnet mask to a 24-bitmask
D. Change the subnet mask to a 27-bitmask.

[单项选择]You develop a Web application. Your application contains two settings in the Web.config file. You deploy your application to production. You need to modify the application settings in the production environment without manually editing the XML markup in the Web.config file. What should you do? （）
A. Modify the application settings by using the Web Site Administration Tool.
B. Modify the application settings by using the Visual Studio property page editor for the project.
C. Modify the application settings by using the resource editor.
D. Modify the application settings by using the Visual Studio start options editor.

[单项选择]You write a Web application. This application must support multiple languages. You store the localized strings in the application as resources. You want these resources to be accessed according to a users language preference. You create the following resource files in the App_GlobalResources folder of your application.myStrings.resxmyStrings.enCA.resxmyString.en-US.resxmyStrings.fr-CA.resxmyStrings.es-MX.resx resource file stores a localized version of the following strings: Name, E-mail, Address, and Phone. You create a Web Form that contains one label for each of these strings. You need to ensure that the correct localized version of each string is displayed in each label, according to a users language preference. What should you do? （）
A. Add the following configuration section to the Web.config file.
B. Set the directive for each page in your site as follows: <%@ Page UICulture="Auto" %>
C. Add the following code segment to the pages load event. lblName.Text = "{myStrings}Name" lblAddress.Text = "{myStrings}Address" lblEmail.Text = "{myStrings}Email" lblPhone.Text = "{myStrings}Phone"
D. Add the following code segment to the pages load event. lblName.Text = Resources.myStrings.Name lblAddress.Text =Resources.myStrings.Address lblEmail.Text = Resources.myStrings.Email lblPhone.Text = Resources.myStrings.Phone