更多"Which configuration causes RIP-lear"的相关试题:
[单项选择]Which configuration causes RIP-learned routes to be advertised to other RIP neighbors?（）
A. set protocol rip no-passive
B. top edit policy-options policy-statement demo set term 1 from protocol rip set term 1 then accept top set protocols rip group internal export demo
C. set protocols rip advertise in-out
D. top edit policy-options policy-statement demo set term 1 from active routes set term 1 then accept top set protocols rip group internal export demo
[单项选择]Which configuration command causes a PPPoE subscriber to be connected to a captive portal?（）
A. url
B. motm
C. acName
D. sessions
[单项选择]Which method loads the configuration which was active before your last commit?（）
A. load replace last-active
B. load rollback 1
C. rollback 1
D. rollback last-active
[单项选择]Given the following LSP configuration, which statement is true?（）label-switched-path lsp-xyz { to 10.200.1.1; primary path1; secondary path2; secondary path3; no-cspf; } path path1 { 10.200.10.1 strict; } path path2 { 10.200.20.1 strict; } path path3 { 10.200.30.1 loose; }
A. The router will use path1 when it is available and stable.
B. The router will use path3 when it is available and stable.
C. The router will attempt to establish path2 only when path1 and path3 are down.
D. The router will attempt to establish path1 only when path2 and path3 are down.
[单项选择]Assuming the default switch configuration,which approach should you use to configure the extended vlan range(1006 through 4094) on a cisco catalyst 3750 series switch?（）
A. Configure the switch to be in VTP client mode.
B. Configure the switch to be in VTP domaint mode.
C. Configure the switch to be in VTP transparent mode.
D. Configure the switch to be in VTPv2.
[单项选择]What does the ip access-routes configuration command accomplish?（）
A. It statically places a host route in the routing table.
B. It statically associates an IP address with a customer.
C. It dynamically creates a host route in the routing table.
D. It dynamically assigns an address to the router's interface
[单项选择]assuming the default switch configuration which vlan range can be added modified and removed on a cisco switch?（）
A. 2 through 1001
B. 1 through 1001
C. 1 through 1002
D. 2 through 1005
[单项选择]Which configuration command configures queue buffer allocation on the ERX Edge Router?（）
A. qos-profile
B. queue-profile
C. scheduler-profile
D. traffic-shape-profile
[单项选择]Which configuration shows the correct application of a security policy scheduler?（）
A. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } scheduler-name now; } } }
B. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }
C. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; } then { permit { tunnel { ipsec-vpn scheduler-name now; } } } }
D. [edit security policies from-zone Private to-zone External] user@host# show policy allowTransit { match { source-address PrivateHosts; destination-address ExtServers; application ExtApps; scheduler-name now; } then { permit { tunnel { ipsec-vpn myTunnel; } } } scheduler-name now; }myTunnel;
[单项选择]Which configuration command permits dynamic detection of the ATM frame format?（）
A. aal5mux
B. aal5snap
C. aal5dynamic
D. aal5autoconfig
[单项选择]Which configuration command dynamically detects and configures a PPPoA interface?（）
A. auto-configure ip
B. auto-configure ppp
C. auto-configure pppoe
D. auto-configure bridgedethernet
[单项选择]Which profile configuration command dynamically creates a host route in the routing table?（）
A. ip host routes
B. ip access-routes
C. host routes enabled
D. access-routes enabled
[多项选择]Which two static routes are typically configured on your router when a Routed 1483 network is grouping ATM PVCs into alarge subnet?（）
A. host route
B. default route
C. customer network
D. ISP’s routing domain
[多项选择]Which two statements are true about static routes in the Junos OS?（）
A. Static routes are defined at the [edit routing-instances] hierarchy.
B. Static routes must have a next hop defined.
C. Static routes remain in the routing table until you remove them or until they become inactive.
D. Static routes are learned by neighboring devices and added to their routing tables.
