[单项选择]An administrator is attempting to start a server from a bootable Linux disk but instead the server boots into Windows. Which of the following is the MOST likely reason for this?（）
A. The system needs to boot to Windows first, prior to booting into Linux.
B. The OS settings are not set properly for Linux support.
C. The boot order is set incorrectly in the BIOS.
D. The Linux disk is not supported in a Windows environment.

[单项选择] An administrator is attempting to recover afilesystem that fails to manually unmount. The fsck command produces the following output: The current volume is: /dev/fslv02 File system is currently mounted. Invalid file system size in the primary superblock. Invalid file system size in the secondary superblock. Primary superblock is corrupt. Secondary superblock is corrupt. fsck: Cannot continue tried to mount Which steps will resolve the problem?（）
A. Reboot the server into maintenance mode and run 'fsck' with the '-p' parameter while the filesystem is mounted
B. Reboot the server into maintenance mode and run 'fsck' with the '-y' parameter whilethe filesystem is unmounted
C. Force a umount of the filesystem with 'umount -F /dev/fslv02', and then run 'fsck p /dev/fslv02' while the file system is unmounted
D. Force a umount of the filesystem by varying off the hosting volume group and then varyon the volume group. This will permit 'fsck -y' to be run against the failing filesystem

[单项选择]An administrator is attempting to use Hyper-V on a server with an AMD processor but is receiving an error. Which of the following should be enabled to resolve the error?（）
A. XD
B. NX
C. VT
D. Hyperthreading

[单项选择] An administrator has just installed a web server for the company's Internet site. After bringing the system online, customers notify the administrator that they cannot connect to the server. The administrator tests the web server from a workstation and can access the website. The customers continue to report issues. Which of the following is the MOST likely reason for this?（）
A. The server's firewall is misconfigured.
B. The server's timeout feature is set incorrectly.
C. The web server was not installed properly.
D. The company firewall is misconfigured.

[单项选择] You are attempting to secure a MySQL server by using SSL encryption. On starting MySQL, you get this error: 130123 10:38:02 [ERROR] mysqld: unknown option '—ssl' What is the cause of the error?（）
A. The — ssl level was not specified
B. The server was not started with the – enable–ssl-plugin option
C. — ssl is not a valid server option
D. The mysqld binary was not compiled with SSL support
E. The server's SSL certificate was invalid

[单项选择]A system administrator boots a server in normal mode, the boot process displays and LED 551 and stops. LED 551 indicates the root volume group is being varied on. All of the following are probable causes of the problem EXCEPT:（）
A. The bosboot command failed to complete.
B. The JFS log device is corrupted.
C. The initttab file is corrupted.
D. The /dev entries or /etc files are missing.

[单项选择]An administrator is installing Windows Server 2003 via CD on a new server with an SAS RAID array. When the administrator reaches the option to select the target installation drive, there are no drives listed. Which of the following is the FIRST thing the administrator should do?（）
A. Restart the installation via WDS.
B. Shut down the server and check that all RAID drives are connected properly.
C. Restart the installation from CD and press F6 to install RAID drivers.
D. Go into the BIOS and set all RAID drives to compatibility mode

[单项选择]An administrator is running proprietary server software that requires services to be reconfigured every time the server is upgraded to the latest vendor version. Which of the following is the BEST solution to address this problem?（）
A. The current system configuration should be documented for future use.
B. Server diagramming and environmental topologies should be documented.
C. A copy of the latest pre-installation plan should be developed and utilized.
D. Vendor support should be contacted so that they can correct the issue.

[单项选择]An administrator identifies that a server is shutting down. The administrator powers up the server and OS loads but after a few minutes it powers down again. Which of the following is the cause?（）
A. Redundant power supply failure
B. CPU overheating
C. Memory failure
D. Hard disk failure

[多项选择]An administrator is configuring one server to monitor hardware level information on a second Windows server.Which of the following should be setup on the Windows server to allow the monitoring server to access this information?（）
A. WMI
B. RIS
C. DNS
D. SNMP
E. SMTP

[单项选择] An administrator is attempting to recover a filesystem that fails to manually unmount. The fsck command produces the following output： The current volume is： /dev/fslv02 File system is currently mounted.   Invalid file system size in the primary superblock. Invalid file system size in the secondary superblock.  Primary superblock is corrupt. Secondary superblock is corrupt.   fsck： 0507-018 Superblock is corrupt and cannot be repaired. Both primary and secondary copies are corrupt.Cannot continue tried to mount  Which steps will resolve the problem？（）
A. Reboot the server into maintenance mode and run ‘fsck’ with the ‘-p’ parameter while the filesystem is mounted.
B. Reboot the server into maintenance mode and run ‘fsck’ with the ‘-y’ parameter while the filesystem is unmounted.
C. Force a umount of the filesystem with ‘umount -F /dev/fslv02’， and then run ‘fsck -p /dev/fslv02’ while the filesystem is unmounted.
D. Force a umount of the filesystem by varying off the hosting volume group and then varyon the volume group. This will permit ‘fsck -y’ to be run against the failing filesystem.

[单项选择]A system administrator receives a new server and has booted the system for the first time. The administrator has set up the terminals and users. The user start to log on. Root is logged in on the console. When additional users start to log in, an error is displayed stating that All available login sessions are in use. Which of the following steps should be followed to resolve this problem?（）
A. Permissions on /etc/security were changed in error; do a chmod 755 on /etc/security directory.
B. Increase the number of licenses; using smit chaili cense
C. Change the Maximum number of PROCESSES allowed per user variable; using smit chgsys.
D. Change User can logi field from false to true: using smit chuser.

[多项选择] You are the administrator of a Windows Server 2003 computer named Server1. The hardware vendor for Server1 notifies you that a critical hotfix is available. This hotfix is required for all models of this computer that have a certain network interface card. You need to find out if the network interface card that requires the hotfix is installed in Server1. What are two possible ways to achieve this goal? （）(Each correct answer presents a complete solution. Choose two.)
A. Open Network Connections, and then examine the properties of each connection that is listed.
B. Open the Component Services snap-in, expand Computers, expand My Computer, and then examine the list.
C. Run the netsh interface command, and then examine the list.
D. Open Device Manager, expand Network adapters, and then examine the list