更多"A customer has a requirement for a "的相关试题:
[单项选择] A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?（）
A. Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
B. Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
C. Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
D. Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
[单项选择] A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
A. In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
B. In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
C. In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
D. In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.
[单项选择]An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?（）
A. varyon of the paging device failed.
B. fsck of the root (/) filesystem failed.
C. varyon of the root volume group failed.
D. IPL device could not be opened or a read failed.
[单项选择]An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）
A. On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
B. On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
C. On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
D. On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
[单项选择] A customer has a requirement to eliminate single points of failure for an application. They have allocated one Ethernet adapter to each VIO server on the system. Which features of PowerVM and AIX will support the customer requirement？（）
A. Etherchannel and trunking
B. Network Interface Backup and Etherchannel
C. Shared Ethernet Adapter （SEA） Failover and Etherchannel
D. Network Interface Backup and Shared Ethernet Adapter failover
[单项选择] An administrator is supporting an AIX 6.1 LPAR remotely and needs a tape operator to plug a cable into an Ethernet adapter. The tape operator does not have POWER6 595 knowledge. What can the administrator do to assist the tape operator to locate the correct adapter?（）
A. Advise the tape operator to review the hardware service guide.
B. Use the diag command to set the Ethernet adapter slot LED to flash.
C. Advise the tape operator to check the WWN stickers of all Ethernet adapter in the I/O drawers.
D. Create a login account for tape operator on the HMC and advise the tape operator to locate the adapter using the GUI step by step.
[单项选择] A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed， the fibre cables are attached to the adapters. How should the administrator configure the disks？（）
A. Run ’mkdev’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
B. Run ’mkpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
C. Run ’chpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
D. Run ’cfgmgr’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
[单项选择] An LPAR has hung during a reboot， reporting a 0552 LED code. What does this signify？（）
A. varyon of the paging device failed.
B. fsck of the root （/） filesystem failed.
C. varyon of the root volume group failed.
D. IPL device could not be opened or a read failed.
[单项选择] Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）
A. Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive
B. Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server
C. Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition
D. 3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solution
[单项选择]An AIX system has a rootvg plus a separate volume group for database application. Which of the following commands are sued to backup the entire system?（）
A. smitty mksysb (select additional volume group)
B. mkszfile && mksysb /dev/rmt0
C. smitty mksysb AND smitty savevg
D. smitty savevg (select additional volume group)
[单项选择](Not single) alphabet has (ever) perfectly represented the sounds of (any) of the (Earth's) natural languages.
[单项选择]A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）
A. 4
B. 8
C. 16
D. 32
[单项选择] A customer business requirement addresses data encryption implemented in tape and disk media. They plan to deploy a DS8700 to provide enterprise class storage and plan to configure the DS8700 with SSD and Fiber Channel disk drives. Which statement is TRUE regarding disk encryption（）
A. SSD disk encryption does not consume space
B. SSD disk is faster than FC disk for encryption
C. no space is wasted due to encryption on DS8700
D. there is higher processor utilization using FDE drives
[单项选择]your company has a single active directory forest that has a domain in North America named na.contoso.com and a domain in south America named sa.contoso.com. The client computers run windows vista. You need to configure the client computes in north America office to improve the name resolution response time for resources in the south ameirca offica. What should you do?（）
A. Configure a new GPO that disables the Local-Link multicast name resolution feature. Apply the policy to all the client computes in the north America office.
B. Configure a new GPO that enables the local-Link Multicast name resolution feature. Apply the policy to all the client computers in the north America office.
C. Configure a new GPO that configures the DNS suffix search list option to sa. Contoso.com, na.contoso.com apply the policy to all the client computers in the north America office.
D. Configure the priority value for the SRV records on each of the north America domain controllers to 5.
[多项选择] Your company has a single Active Directory forest that has six domains. All DNS servers in the forest run Windows Server 2008 R2.You need to ensure that all public DNS queries are channeled through a single-caching-only DNS server. Which two actions should you perform？（）
A. Disable the root hints.
B. Enable BIND secondaries.
C. Configure a forwarder to the caching DNS server.
D. Configure a GlobalNames host (A) record for the hostname of the caching DNS server.
[单项选择]Your company has a single active directory domain named contoso.com. all servers run windows server 2008. You have a public DNS server named server1, and an e-mail server named server2. Client computers outside the company domain are unable to send e-mail messages to contoso.com. you verify that the host (A) DNS record for server2 is available to external client computers. You need to ensure server2 can receive e-mail messages from external client computers. How should you configure the contoso.com DNS zone?（）
A. Add a mail exchange (MX) record for server2.
B. Add a mailbox (MB) record for server2. Set the mailbox host setting to server2.
C. Add a canonical (CNAME) record that maps server2 to contoso.com.
D. Add a server locator (SRV) record for server2. Set the service field to _smtp. Set the protocol field to _tcp. Set the port number to 25.
