更多"You are creating "的相关试题:
[单项选择]You have configured your chassis cluster to include redundancy group 1. Node 0 is configured to be the primary node for this redundancy group. You need to verify that the redundancy group failover is successful.Which command do you use to manually test the failover?（）
A. request chassis cluster manual failover group 1 node 1
B. request cluster failover redundancy-group 1 node 1
C. request chassis cluster manual failover redundancy-group 1 node 1
D. request chassis cluster failover redundancy-group 1 node 1
[单项选择]Although women cluster to him like moths around a flame, he is none ______ happier for it.
A. but
B. the
C. much
D. any
[多项选择]What are two valid Cluster load balancing methods? （）(Choose two.)
A. urlhash
B. backup chaining
C. least connections
D. fewest outstanding requests
[单项选择]You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG Series device.Which statement is true?（）
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device defined in each configuration.
D. A single Infranet enforcer instance is created with the VIP of the clustered SRX Series device defined in the configuration.
[单项选择]A customer has two single cluster IBM TS7700 Virtualization Engines at the same site. The customer wants to move one to a remote site and set up a grid configuration with the two clusters. The customer has fibre between the two sites. What is the most important factor to consider when planning the new configuration?（）
A. operator training
B. cache size of the two clusters
C. fibre bandwidth capability between the sites
D. number of stacked tape drives attached to each cluster
[单项选择]In order to cluster IBM SONAS interface nodes so that they can serve the same data, the interface nodes must coordinate their locking and recovery. This coordination is done through（）.
A. SONAS Health Center
B. SONAS Cluster Manager
C. Tivoli Storage Manager
D. Windows Active Directory
[单项选择]If both nodes in a chassis cluster initialize at different times, which configuration example will allow you to ensure that the node with the higher priority will become primary for your RGs other than RG0?（）
A. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150;preempt; }
B. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; monitoring; }
C. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; control-link-recovery; }
D. [edit chassis cluster] user@host# show redundancy-group 1 { node 0 priority 200; node 1 priority 150; strict-priority; }
[单项选择]What is the purpose of a chassis cluster?（）
A. Chassis clusters are used to aggregate routes.
B. Chassis clusters are used to create aggregate interfaces.
C. Chassis clusters are used to group two chassis into one logical chassis.
D. Chassis clusters are used to group all interfaces into one cluster interface.
[单项选择]In a chassis cluster with two SRX 5800 devices, the interface ge-13/0/0 belongs to which device?（）
A. This interface is a system-created interface.
B. This interface belongs to node 0 of the cluster.
C. This interface belongs to node 1 of the cluster.
D. This interface will not exist because SRX 5800 devices have only 12 slots.
[单项选择]When using UTM features in an HA cluster, which statement is true for installing the licenses on the cluster members?（）
A. One UTM cluster license will activate UTM features on both members.
B. Each device will need a UTM license generated for its serial number.
C. Each device will need a UTM license generated for the cluster, but licenses can be applied to either member.
D. HA clustering automatically comes with UTM licensing, no additional actions are needed.
[单项选择]The word "cluster" in line 4 is closest in meaning to
A. (organ
B. ( activity
C. ( group
D. ( cycle
[单项选择]In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device? （）
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
[单项选择]For a Juniper DX Cluster, what is a basic target server health check?（）
A. ping
B. TCP health check
C. Layer 7 health check
D. request HTTP default page
[多项选择]What are three Juniper DX Cluster benefits?（） (Choose three.)
A. performance
B. authorization
C. compression
D. protocol validation
E. UDP load balancing
[单项选择] During initial cluster planning session， a requirement is mandated that application monitoring will Be used to monitor the production database and three application servers. Since all the application servers rely on the database being active， only one resource group has been planned to manage the starting/stopping of the cluster resources. How ill the initial design impact the use of application monitoring？（）
A. Only one application server per resource group can be monitored.
B. Process monitoring is part of RSCT and requires no special scripts.
C. Any application can be monitored as long as it has an application server.
D. Having all application servers in one resource group improves recovery time.
[单项选择] Company.com performs cluster verification every Sunday night with a corn job. The systems administrator reviews the /var/hacmp/clverify/clverify.log on Monday morning and notice that cluster verification posted a message about inconsistent filesystem names in one of the shared volume groups. What should the administrator do？（）
A. Cause a fallover to occur on the resource group.
B. Export the volume groups and re-import them on all nodes.
C. Run an importvg -L command on all the nodes in the cluster.
D. Investiage recent changes to the shared volume group and use C-SPOC to correct inconsistencies.
[单项选择] During cluster fallover testing，the administrator determines that additional work is required to stop existing test applications on the standby node，prior to starting the production applications on the surviving node. To manage this type of requirement，which step should be performed first？（）
A. Create a custom pre/post event.
B. Add a custom user defined event.
C. Define custom error notification.
D. Modify the test application server.
[单项选择] During normal cluster processing in a five-node cluster，one of the nodes unexpectedly crashes. A review of the system dump indicates that a DMS timeout has occurred. The cluster is configured to use disk heartbeats as a Point-to-Point network. What should be done to address the problem with this configuration？（）
A. More disk should be added to the disk heartbeat network，allowing more paths for heartbeats.
B. An RS232 network is required to supply a more robust non-IP network when disk heartbeating is implemented.
C. The network tunable parameters should be changed to allow more missed heartbeats since the disks may be heavily used.
D. An error notification method is required to determine the action to take in response to a failure of the disk heartbeat.
[单项选择] A cluster administrator decides ti implement application monitoring in order to monitor both a web application and its supporting database. The plan is to use a single resource group prod_rg and to configure one monitor method for the web app and one monitor method for the database. Which of the following statements best describes the need for custom resource monitor？（）
A. Multiple application servers must be in a single resource group.
B. Multiple application servers per resource group may be monitored.
C. Multiple resource groups must each contain a single application server.
D. Multiple application servers in a cluster cannot use process monitoring.
