[单项选择]Which one of these class maps was configured to match traffic for CS5?（）
A. CIS 1# show class-map forward Class map match-all forward ( id 3) Match ip dscp 18
B. CIS1#show access-map block Class map match-all block (id 4) Match ip dscp 43
C. CIS1# show class-map real-time Class map match-all block (id 5) Match ip dscp 16
D. CIS 1# show class-map pass Class map match-all real-time (id 2) Match ip dscp 40

更多"Which one of these class maps was "的相关试题:

[多项选择]When a DHCP server is configured, which two IP addresses should never be assignable to hosts?（）
A. network or subnetwork IP address
B. broadcast address on the network
C. IP address leased to the LAN
D. IP address used by the interfaces
E. manually assigned address to the clients
F. designated IP address to the DHCP server

查看答案

[多项选择]Which two statements about an interface configured with the asr-group command are correct?（）
A. The FWSM supports up to 16 asymmetric routing groups.
B. If a matching packet is not found, the packet is dropped.
C. Asymetric routing of return traffic is enabled.
D. If a matching packet is found, the Layer 3 header is rewritten.
E. If a matching packet is found, the Layer 3 header is rewritten and the packet is forwarded to the default gateway.

查看答案

[多项选择]Which two parameters are configured in IPsec policy? （）(Choose two.)
A. mode
B. IKE gateway
C. security proposal
D. Perfect Forward Secrecy

查看答案

[多项选择]Which two static routes are typically configured on your router when a Routed 1483 network is grouping ATM PVCs into alarge subnet?（）
A. host route
B. default route
C. customer network
D. ISP’s routing domain

查看答案

[单项选择]Which of the following devices could be configured as a DHCP server?（）
A. Wireless router
B. Unmanaged switch
C. Hub
D. Repeater

查看答案

[单项选择]Which routers must be configured with the same authentication string when configuring OSPFauthentication?（）
A. all routers on a link
B. all routers in an area
C. all external OSPF peers
D. all routers in an OSPF domain

查看答案

[多项选择]Which three must be configured for the Packet Capture tool to collect all required data? （）(Choose three.)
A. Enter the password.
B. Modify the delete time to 3 hours.
C. Set the interface to local, remote or both.
D. Increase the snap length of the Packet Capture configuration.
E. Set the Packet Capture size to greater than the actual data flow

查看答案

[多项选择]Which three parameters are configured in the IKE policy?（） (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings

查看答案

[多项选择]Which two locations can be configured as a source for the IOS image in the boot system command?（）
A. RAM
B. NVRAM
C. flash memory
D. HTTP server
E. TFTP server
F. Telnet server

查看答案

[多项选择]Which two settings must be configured in order to use the GUI to configure Call Admission Control with voice applications?（）
A. QoS must be set to Platinum
B. WMM must be enabled
C. QoS must be set to Gold
D. TSPEC must be disabled
E. Cisco Compatible Extensions must be disabled

查看答案

[单项选择]Which of the following must be configured on printers so that the server can properly monitor details on page counts?（）
A. WMI
B. DHCP
C. SNMP
D. MIB

查看答案

[单项选择]Which of the following should be configured to provide priority to voice traffic?（）
A. Port mirroring
B. DMZ
C. Qos
D. Trunking

查看答案

[单项选择]Which logical unit number must be configured on an interface using PPP encapsulation?（）
A. unit 0
B. unit 1
C. unit 100
D. unit 255

查看答案

我来回答:

提交