更多"You are a technician at TestKing. Y"的相关试题:
[多项选择]You are a technician at TestKing. Your newly appointed TestKing trainee wants to know what the CDP is.What would your reply be?（）
A. It is globally enabled by default on Cisco routers.
B. It is globally enabled by default on all routers.
C. It is a proprietary protocol.
D. It is a non-proprietary protocol.
E. It can be used to gather hardware and protocol information about neighbor devices.
[单项选择]You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?（）
A. router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0
B. router(config-if)#142.8.2.1 0.0.3.255
C. router(config-if)#ip address 142.8.2.1 255.255.252.0
D. router(config-if)#142.8.2.1 subnet mask 255.255.252.0
E. router(config-if)#ip address 142.8.2.1 0.0.3.255
F. router(config-if)#ip address 142.8.2.1 subnet mask /22
[单项选择]You are a technician at TestKing. Your assistant applied an IP access control list to Router TK1. You want to check the placement and direction of the access control list.Which command should you use?（）
A. show access-list
B. show ip access-list
C. show ip interface
D. show interface
E. show interface list
[单项选择] On your newly installed router, you apply the access list illustrated below to interface Ethernet 0 on a Cisco router. The interface is connected to the 192.168.1.8/29 LAN. access-list 123 deny tcp 192.168.166.18 0.0.0.7 eq 20 any access-list 123 deny tcp 192.168.166.18 0.0.0.7 eq 21 any How will the above access lists affect traffic?（）
A. All traffic will be allowed to exit E0 except FTP traffic.
B. FTP traffic from 192.168.166.19 to any host will be denied.
C. FTP traffic from 192.168.166.22 to any host will be denied.
D. All traffic exiting E0 will be denied.
E. All FTP traffic to network 192.168.166.18/29 from any host will be denied.
[多项选择]You are a trainee technician at TestKing, Inc. Your instructor tells you to backup an IOS image of a Cisco device to a Windows 2003 server on the network.What should you do first?（）
A. Make sure that the network server can be accessed.
B. Check that the authentication for access is set.
C. Assure that the network server has adequate space for the code image.
D. Verify any file naming and path requirements.
E. Make sure that the server can load and run the bootstrap code.
[单项选择]As an experienced technician, you are responsible for Technical Support. One of the trainees is asking your advice on VPN Termination Device and Firewall Placement. Which of the following approaches will you recommend?（）
A. inline with a firewall
B. in a DMZ outside the firewall
C. parallel with a firewall
D. in a DMZ behind the firewall
[单项选择]As an experienced technician, you are required to configure and verify SRM with SSO redundancy. In such a situation, you have to issue several commands in proper orders. Which of the following is correct?（）
A. show redundancy states, redundancy, mode sso
B. show redundancy states, mode sso, redundancy
C. redundancy, mode sso, show redundancy states
D. mode sso, redundancy, show redundancy states
[单项选择]During a（）period, as a newly commissioned SES, your IMN will be past to the other CESs.
A. 20 hour
B. 12 hour
C. 24 minute
D. 24 hour
[单项选择]My bicycle is outdated. Your newly bought bike is ______ than mine.
A. very good
B. very better
C. far better
D. good
[单项选择]You work with a newly created database. Presently, there is no application load on the database instance.You want to create a baseline for tuning the application, so you decide to collect recommendations that can be implemented to improve application performance.What action must you take to achieve this?（）
A. Run Segment Advisor
B. Run the SQL Tuning Advisor (STA)
C. Run the Automatic Workload Repository (AWR) report
D. Run the SQL Access Advisor with a hypothetical workload
