题目详情
当前位置:首页 > 职业培训考试
题目详情:
发布时间:2023-12-27 19:53:30

[单项选择]A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? ()Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
A. The process id is configured improperly
B. The OSPF area is configured improperly
C. The network wildcard mask is configured improperly
D. The network number is configured improperly
E. The AS is configured improperly
F. The network subnet mask is configuerd improperly

更多"A network administrator is trying t"的相关试题:

[单项选择] A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?() Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
A. The process id is configured improperly
B. The OSPF area is configured improperly
C. The network wildcard mask is configured improperly
D. The network number is configured improperly
E. The AS is configured improperly
F. The network subnet mask is configuerd improperly
[单项选择] A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?()
A. CAT3 cable
B. Serial cable
C. Crossover cable
D. Rollover cable
[单项选择]A network administrator wants to add a line to an access list that will block only Telnet access by the hosts on subnet 192.168.1.128/28 to the server at 192.168.1.5. What command should be issued to accomplish this task?()
A. access-list 101 deny tcp 192.168.1.128 0.0.0.15 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
B. access-list 101 deny tcp 192.168.1.128 0.0.0.240 192.168.1.5 0.0.0.0 eq 23 access-list 101 permit ip any any
C. access-list 1 deny tcp 192.168.1.128 0.0.0.255 192.168.1.5 0.0.0.0 eq 21 access-list 1 permit ip any any
D. access-list 1 deny tcp 192.168.1.128 0.0.0.15 host 192.168.1.5 eq 23 access-list 1 permit ip any any
[单项选择] You are the network administrator in the New York office of TestKing. The company network consists of a single Active Directory domain The New York office currently contains one Windows Server 2003 file server named TestKingA. All file servers in the New York office are in an organizational unit (OU) named New York Servers. You have been assigned the Allow - Change permission for a Group Policy object (GPO) named NYServersGPO, which is linked to the New York Servers OU. The written company security policy states that all new servers must be configured with specified predefined security settings when the servers join the domain. These settings differ slightly for the various company offices. You plan to install Windows Sever 2003, on 15 new computers, which all functions as file servers. You will need to configure the specified security settings on the new file servers. TestKingA currently has the specified security settings configured in its local security policy. You need to ensure that the security configuration of the new file servers is identical to that of TestKingA. You export a copy of TestKingA's local security policy settings to a template file. You need to configure the security settings of the new servers, and you want to use the minimum amount of administrative effort. What should you do?()
A. Use the Security Configuration and Analysis tool on one of the new servers to import the template file.
B. Use the default Domain Security Policy console on one of the new servers to import the template file.
C. Use the Group Policy Editor console to open NYServersGPO and import the template file.
D. Use the default Local Security Policy console on one of the new servers to import the template file.
[单项选择]An administrator installs a new network card in a properly functioning DC. During the Windows boot up process the DC bluescreens. Which of the following is the NEXT step?()
A. Press F8 and boot to Directory Services Restore Mode.
B. Press F8 and boot to Last Known Good Configuration.
C. Reboot the server again.
D. Press F8 and boot to Safe Mode.
[多项选择]The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)()。
A. The command establishes a static route.
B. The command invokes a dynamic routing protocol for 192.168.12.0.
C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1.
D. Traffic for all networks is forwarded to 172.16.12.1.
E. This route is automatically propagated throughout the entire network.
F. Trafficfor network 172.16.12.0 is forwarded to the 192.168.12.0 network.
[单项选择] You are the network administrator for The network consists of a single Active Directory domain named All domain controllers run Windows Server 2003, and each one has a locally attached tape device. You need to back up each domain controller. Your backup process must fulfil the following requirements: System recovery must be possible in the event of server failure. The system configuration and all current dynamic disk configurations must be backed up. Other data partitions do not need to be backed up. What should you do?()
A. Use the Backup utility to back up the system files and to create an Automated System Recovery (ASR) disk.
B. Use the Backup utility to back up the contents of all mounted drives.
C. Use the Backup utility to back up only the System State data.
D. Use the Copy command to copy C:/windows and its subfolders to a shared folder on the network.
E. Use the Xcopy command to copy C:/windows and its subfolders to a shared folder on the network.
[单项选择] You are the network administrator for All network servers run Windows Server 2003. A server named TK1 contains a mirrored volume that consists of two 36-GB disks. Both disks are used for data storage. TK1 also contains a third unallocated dynamic disk. Next week, a database that currently requires 45 GB of disk space will be installed on TK1. This database will grow at a rate of 10 percent every 6 months. You need to realocate disk space on TK1. Your realocation must satisfy the space requirements of the new database, and it must also ensure that data will remain available in case of disk failure. First, you break the mirror and delete all volumes on the disks. What should you do next?()
A. Create a spanned volume.
B. Create a stripped volume.
C. Create a mirrored volume.
D. Create a RAID-5 volume.

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码