题目详情
当前位置:首页 > 职业技能鉴定考试 > 轮机英语
题目详情:
发布时间:2023-10-11 23:08:16

[单项选择]The volute of centrifugal pump also acts as a diffuser converting ()into pressure head.
A. mechanical energy
B. heat energy
C. potential energy
D. kinetic head

更多"The volute of centrifugal pump also"的相关试题:

[单项选择]The function of a centrifugal pump double volute casing is to ().
A. reduce radial thrust to the impeller
B. double the liquid velocity through the pump when compared to a single volute
C. reduce hydraulic end thrust
D. provide the effect of multi-staging
[单项选择]Under centrifugal pumps are the volute, diffuser, mixed-flow, axial flow and () or regenerative types.
A. reciprocating
B. hydraulic
C. turbine
D. vane
[单项选择]While flowing through the volute in a centrifugal pump, part of the () energy of the liquid is converted to () energy.
A. kinetic;pressure
B. kinetic;essential
C. pressure;kinetic
D. pressure;height
[单项选择]The ()pump is usually used as the bilge feed pump to an oily water separator.
A. turbine
B. screw
C. vane
D. ejector
[单项选择]Which pump is the self-priming pump?()
A. turbine
B. centrifugal
C. ejector
D. mixed flow
[单项选择]A () pump is that where the volume of the pump chamber is alternately increased to draw the liquid in and then decreased to force the liquid out.
A. injector
B. positive displacement
C. centrifugal
D. centripetal
[单项选择]A mixed-flow pump is a () pump classified by the working principle.
A. self priming
B. positive displacement
C. reciprocating
D. impeller
[单项选择]Because the actual center of some planets may differ from the observed center,the navigator applies a correction known as the().
A. phase correction
B. refraction correction
C. semidiameter correction
D. augmentation correction
[单项选择]Which of the following centrifugal pump components converts the liquid kinetic energy of velocity to the potential energy of pressure?()
A. Impeller
B. Electric motor
C. Volute
D. Eye
[单项选择]Which pump installation would require an external source of sealing water?()
A. Main circulator pump jacket water cooling
B. Salt water service pump
C. Auxiliary condensate pump
D. Bilge pump
[单项选择]Most pump manufacturers recommend that the suction piping dimension for centrifugal pumps be ().
A. one size smaller than the pump suction nozzle
B. the same size as the pump suction nozzle
C. one size larger than the pump suction nozzle
D. installed with a short radius elbow at the pump
[单项选择]A centrifugal pump vibrates excessively during operationUpon disassembling the pump it is found that the impeller is out of balanceWithout an available spare, you should ().
A. drill holes through the heavy side of the impeller until it balances
B. weld counterweights to the light side of the impeller
C. remove metal from the heavy side by machining in a lathe
D. acid wash and serape the heavy side until it balances
[单项选择]When disassembling or assembling an injection pump plunger and barrel you should ()
A. keep the parts immersed in diesel fuel
B. always keep the plunger and barrel together
C. work over a linoleum-type surface
D. all of the above
[单项选择]The centrifugal pump component responsible for converting the mechanical energy of the liquid being pumped, to that of kinetic energy is the ().
A. electric motor
B. volute
C. impeller
D. diffusion nozzle
[单项选择]A centrifugal pump produces the required pressure energy by means of a rotating () provided with vanes.
A. propeller
B. impeller
C. circumference
D. screw
[单项选择]Exchange of answer-backs acts a confirmation that the messages()at the destination.
A. have received
B. have been received
C. are received
D. are being received
[单项选择]The effect known as bank cushion acts in which of the following ways on a single-screw vessel proceeding along a narrow channel? ()
A. It forces the bow away from the bank
B. It forces the stern away from the bank
C. It forces the entire vessel away from the bank
D. It heels the vessel toward the bank
[单项选择]A centrifugal pump attempting to develop flow against a closed discharge valve has a/an ().
A. capacity of 0%
B. efficiency of 100%
C. internal slippage of 0%
D. shut off horsepower rating of 100%
[单项选择]If a centrifugal bilge pump were continually operated with the discharge valve closed the ().
A. motor overload would open
B. relief valve would open
C. pump would eventually overheat
D. motor would overheat

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

截图扫码使用小程序[完全免费查看答案]
请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码