题目详情
当前位置:首页 > 职业技能鉴定考试 > 轮机英语
题目详情:
发布时间:2023-09-30 11:13:59

[单项选择]The oil quantity for bearing lubrication should be applied in such an amount as to be sufficient to carry away the () caused by the friction at the bearings.
A. acids
B. additives
C. heat
D. gear

更多"The oil quantity for bearing lubric"的相关试题:

[单项选择]Proper lubrication of the main bearing is more easily obtained in a single acting four-stroke/cycle diesel engine than in a single acting two-stroke/cycle diesel engine because ()
A. bearing pressure in a four-stroke/cycle acting single diesel engine is continually reversed
B. bearing pressure in a two-stroke/cycle single acting diesel engine is continually reversed
C. the maximum bearing pressure is higher in a single acting two-stroke/cycle diesel engine
D. two-stoke/cycle diesel engines require more complicated lubrication piping
[单项选择]The quantity of oil injected into the cylinder can be regulated ().
A. by turning the pump plunger
B. by vary the fuel valve spring force
C. by no means by controlling the governor
D. by enlarging or diminishing the injection hole
[单项选择]Cylinder lubrication oil for low speed main propulsion diesel engines is admitted to each cylinder during ().
A. the power stroke
B. the compression stroke
C. low load operation only
D. periods of standby
[单项选择]The total quantity of oil discharge into the sea()for existing tankers 1/15000 of the total quantity of the particular cargo or which the residue formed a part().
A. does not exceed
B. should exceed
C. should be up to
D. should be no more than
[单项选择]Oil pressure in the lubrication system is () the static sea water head to ensure that sea water () the stem-tube.
A. lower than;can lubricate
B. lower than;can cool
C. higher than;can enter
D. higher than ;cannot enter
[单项选择]Oil pressure in the lubrication system is()than the static sea water head to ensure that sea water cannot enter the sterntube in the event of seal failure.
A. higher
B. lower
C. very higher
D. very lower
[单项选择]Waste oil should()
A. be treated according to the C-Es command exactly
B. be treated according to MARPOL
C. accumulate in bilges or on tank tops in accordance with MARPOL
D. discharge to sea at the specified areas
[单项选择]When the bearing becomes dry from lack of oil, the motor shaft may heat to ()an extent () it welds itself to the bearing.
A. either;or
B. neither;nor
C. such;that
D. so;that
[单项选择]The pumps press oil into the cross-head bearing gap when the load on the shell is at its lowest What is the meaning of “its” in the sentence above?()
A. the cross-head
B. the pumps
C. the shell
D. the load
[单项选择]How often should the lubricating oil of a diesel engine be changed?()
A. After every trip
B. Every 4000 hours
C. According to manufacturer’s instructions
D. Every time they are shutdown
[单项选择]Lubricating oil should be changed on a heavy duty diesel engine when().
A. it gets dark in color
B. a sample rubbed between fingers feels thin
C. it has been in use for a specified interval
D. it no longer supports combustion
[单项选择]Burning diesel oil should be treated as which class of fire?()
A. Class "A"
B. Class "B"
C. Class "C"
D. Class "D"
[单项选择]Which of the following should be recorded in Oil Record Book Part I (machinery space operation) ?()
A. Non automatic discharge overboard of machinery space bilge water
B. Automatic discharge overboard of machinery space bilge water
C. A and B
D. Neither A nor B
[单项选择]Main propulsion engine lube oil sumps should be constructed ()
A. so as to never be integral lube
B. with a sloped bottom
C. only of nonferrous, noncorrosive metals
D. with drain/return lines terminating just above or at the designed normal level
[单项选择]A centrifugal fuel oil purifier should be shut down if ()
A. more sealing water is needed
B. the cover clamp needs tightening
C. the purifier has a bad vibration when started
D. water is discharged from the overflow line
[单项选择]There should be a lubricating oil () between the main beatings and the crankshaft.
A. film
B. cap
C. lacquer
D. shell
[单项选择]The oil index of main engine should be controlled to prevent it from in heavy weather()
A. over heat
B. over speed
C. over pressure
D. over worn
[单项选择]The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated ()
A. for atomizing
B. for centrifuging
C. in a storage tank
D. in the re-circulating line

我来回答:

购买搜题卡查看答案
[会员特权] 开通VIP, 查看 全部题目答案
[会员特权] 享免全部广告特权
推荐91天
¥36.8
¥80元
31天
¥20.8
¥40元
365天
¥88.8
¥188元
请选择支付方式
  • 微信支付
  • 支付宝支付
点击支付即表示同意并接受了《购买须知》
立即支付 系统将自动为您注册账号
请使用微信扫码支付

订单号:

请不要关闭本页面,支付完成后请点击【支付完成】按钮
恭喜您,购买搜题卡成功
重要提示:请拍照或截图保存账号密码!
我要搜题网官网:https://www.woyaosouti.com
我已记住账号密码