[单选题]28 Topic1What would an architect recommend to a customer that wants to extend management to an additional data center through Layer 2, but does not want to add additional NSX-T licensing? (Choose the best answer.)
A.Deploy a standalone NSX Controller.
B.Deploy a standalone NSX Manager.
C.Deploy a standalone Edge as the IPSec VPN.
D.Deploy Autonomous Edge as the L2 VPN client.

[单选题]5 Topic1What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)
A.reduced administrative overhead
B.predictable network performance
C.multiple Tier-0 gateways per Edge Node Cluster
D.support for Edge Node Clusters with more than 10 Edge Nodes

[单选题]44 Topic1What is a design justification for a solution with 3 NSX Manager nodes deployed in a 4 ESXi cluster Management Cluster? (Choose the best answer.)
A.NSX Controllers are separated from NSX Managers allowing 6 ESXi servers to host them.
B.NSX Management Plane and Control Plane will be reduced to a single point of failure.
C.Compute consumption guarantees NSX Manager nodes can be run on the same ESXi host.
D.Single point of failure on Control Plane and Management Plane will be mitigated.

[单选题]9 Topic1An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.This information was gathered by the architect during the Discover Task ofthe Enagagement Lifecycle:✑ There are applications which use IPv6 addressing.✑ Network administrators are not familiar with NSX-T Data Center solutions.✑ Hosts can only be configured with two physical NICs.✑ There is an existing management cluster to deploy the NSX-T components.✑ Dynamic routing should be configured between the physical and virtual network.✑ There is a storage array available to deploy NSX-T components.Which constraint was documented by the architect? (Choose the best answer.)
A.Dynamic routing should be configured between the physical and virtual network.
B.There are applications which use IPv6 addressing.
C.Hosts can only be configured with two physical NICs.
D.There are enough CPU and memory resources in the existing management cluster.

[单选题]6 Topic 1An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.This information was gathered during the Assessment Phase:✑ There is a performance based SLA for East "" West traffic. ✑ The business critical applications require prioritization oftheir traffic. ✑ One ofthe services is a file share and has a high demand for bandwidth.Which selection should the architect include in their design? (Choose the best answer.)
A.Review average North/South traffic from the core switches and firewall.
B.Include a segment QoS profile and review the impact of utilizing this feature.
C.Meet with the organization's application team to get additional information.
D.Monitor East-West traffic throughout normal business cycles.

[单选题]17 Topic1An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.
This information was gathered by the architect during the Discover Task ofthe Engagement Lifecycle:✑ There are applications which use IPv6 addressing.✑ Network administrators are not familiar with NSX-T Data Center solutions.✑ Hosts can only be configured with two physical NICs.✑ There is an existing management cluster to deploy the NSX-T components.✑ Dynamic routing should be configured between the physical and virtual network.✑ There is a storage array available to deploy NSX-T components.
Which risk was documented by the architect? (Choose the best answer.)
A.Network administrators are not familiar with NSX-T Data Center solutions.
B.Dynamic routing should be configured between the physical and virtual network.
C.There are applications which use IPv6 addressing.
D.There is a storage array available to deploy NSX-T components.

[单选题]22 Topic1An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.This information was gathered during a workshop:✑ The company will use a Leafand Spine physical network architecture with Layer 3 gateways for top of rack switches.✑ The company is planning to deploy 120 ESX hosts across 10 racks.✑ There will be a total of a 12 clusters where each cluster has one host per rack.
What should the architect recommend to allow applications to run on any host in the cluster? (Choose the best answer.)
A.Deploy all application networks on NSX segments.
B.Deploy an L2 VPN to allow the networks to extend to each host.
C.Deploy a Tier-0 gateway per Rack and configure BGP between racks.
D.Deploy a Tier- 1 gateway per Rack and configure BGP between racks.

[单选题]29 Topic1An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.This information was gathered by the architect during the Discover Task ofthe Engagement Lifecycle:✑ Existing hardware will be used in any design proposal.✑ Network bandwidth cannot be expanded.Which concept of the Discover Task do these items belong to? (Choose the best answer.)
A.constraint
B.requirement
C.risk
D.assumption

[单选题]14 Topic1An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.Which risk is documented by an architect? (Choose the best answer.)
A.The security team has a firewall communication matrix documented.
B.The team is not trained for NSX-T but have a very strong experience with vSphere.
C.Open communication between different application tiers is not allowed.
D.Aggregate N-S throughput at any given time should be at least 10G.

[单选题]25 Topic1An architect is helping an organization with the Logical Design of a Layer 2 bridging solution.This information was gathered during the Assessment Phase:✑ Workloads are running on ESXi hosts.✑ Workloads are running on KVM hosts.✑ Workloads on hypervisors should use bridging services.✑ VLAN 50 is used for Tier-0 uplink connectivity.Which selection should the architect include in their design? (Choose the best answer.)
A.Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN 60.
B.Create an NSX Edge Bridge Cluster and configure the bridging profile with VLAN50.
C.Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 50.
D.Create an ESXi Bridge Cluster and configure the bridging profile with VLAN 60.

[单选题]15 Topic1An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.This information was gathered during the Assessment Phase:✑ Data between two networks connected over a public network needs to be encrypted.✑ Certificate authentication is required.✑ Dynamic route learning is preferred.
Which selection should the architect include in their design? (Choose the best answer.)
A.Deploy a Tier-0 gateway in Active/Standby mode.Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.
B.Deploy a Tier-0 gateway in Active/Active mode.Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
C.Deploy a Tier-0 gateway in Active/Standby mode.Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.
D.Deploy a Tier-0 gateway in Active/Active mode.Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.

[单选题]57 Topic1An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.This information was gathered during the Assessment Phase:✑ Maximum performance and availability is required between the physical and virtual network.✑ Load Balancing service is required for back-end web servers.✑ NAT is required.Which selection should the architect include in their design? (Choose the best answer.)
A.Deploy a Tier- 1 gateway and connect it to an Active/Active Tier-0 gateway withECMP configured.
B.Deploy an Active/Active Tier-0 gateway and configure ECMP.
C.Deploy an Active/Standby Tier-0 gateway and configure ECMP.
D.Create two separate VLANs to connect the Tier-0 gateway upstreamtrafficandconfigure ECMP.

[单选题]35 Topic1A Solutions Architect is working with a customer which wants to extend their traditional Telco IP/MPLS core network to an NFV cloud.Which NSX-T Data Center feature can be recommended by the architect? (Choose the best answer.)
A.istributed IDS
B.EVPN
C.Load Balancer
D.BGP

[单选题]16 Topic1An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.
This information was gathered during a workshop:✑ Migrating existing data center to KVM hosts.✑ Redundancy and high availability are required.✑ No component can be a single point of failure.
Which selection should the architect recommend? (Choose the best answer.)
A.Linux Bridge redundancy with Active/Active Mode and multiple pNICs with necessary binding
B.Linux Bridge redundancy with Active/Active Mode and single pNIC with static binding
C.vSS/vDS in Active/Standby Mode with necessary binding
D.vSS/vDS in Active/Active Mode with necessary pNICS and required binding modes

[单选题]23 Topic1An architect is designing a solution for containerization.The solution will include highavailability and security using NSX-T Data Center.The architect plans to provide a basic required components list in the Logical Design.
Which solution should the architect recommend? (Choose the best answer.)
A.3 NSX Managers, 3 virtual NSX Edges, two Tier-0 gateways in Active/Standby, BGP configuration
B.2 NSX Managers, 2 virtual NSX Edges, one Tier-0 gateway, BGP configuration and a static route
C.3 NSX Managers, 3 virtual NSX Edges, one Tier-0 gateway and a static route and OSPF
D.1 NSX Manager, 2 virtual NSX Edges, two Tier-0 gateways in Active/Active, BGP configuration

[单选题]4 Topic 1.An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.This information was gathered during a workshop:✑ There are six hosts and hardware has already been purchased.✑ Customer is planning a collapsed Management/Edge/Compute cluster.✑ Each host has two 10Gb NICs connected to a pair of switches.✑ There should be no single point of failure in any proposed design.

Which virtual switch design should the architect recommend to the organization? (Choose the best answer.)

A.

Create a vSphere Distributed Switch (vDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.

B.

Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.

C.

Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs.

D.

Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC. 

[单选题]3 Topic 1.An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.This information was gathered during a workshop:✑ Some workloads should be moved to a Cloud Provider.✑ Extend network's VLAN or VNI across sites on the same broadcast domain.✑ Enable VM mobility use cases such as migration and disaster recovery without IP address changes.✑ Support 1500 byte MTU between sites.
Which selection should the architect include in their design? (Choose the best answer.)
A.Load Balancer
B.Reflexive NAT
C.SSL VPN
D.L2 VPN

[多选题]8 Topic1An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
This information was gathered during the Assessment Phase:✑ Customer currently has a single 10 host vSphere cluster.✑ Customer wants to improve network security and automation.✑ Current cluster utilization and business policies prevent changing the existing vSphere deployment.✑ High-availability is important to the customer.
Which three selections should the architect include in their design? (Choose three.)
A.Apply vSphere DRS VM-Host anti-affinity rules to the virtual machines ofthe
NSX-T Edge cluster.
B.Deploy at least two NSX-T Edge virtual machines in the vSphere cluster.
C.Deploy the NSX Controllers in the management cluster.
D.Apply vSphere Distributed Resource Scheduler (vSphere DRS) VM-Host anti- affinity rules to NSX Managers.
E.Remove 2 hosts from the cluster and create a new edge cluster.
F.Remove vSphere DRS VM-Host affinity rules to the NSX-T Controller VMs.

[多选题]43 Topic1An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.During discussions about centralized services NAT running on Tie- 1 or Tier-0 Gateway, the customer made these requests:✑ Services contain stateful services.✑ Services should be in high availability mode.Which two selections should the architect include in their design? (Choose two.)
A.An active/active model should be used.
B.Use Reflexive NAT on the uplink interface.
C.DNAT should be applied on the uplink interface.
D.Mix stateful and stateless NAT rules on the same gateway.
E.The high availability mode supported is only Active-Standby.

[多选题]42 Topic1An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.
Which two statements should the architect consider as non-technical requirements?
A.Any solution should add more value to current and future customers engagements.
B.The design should offer agility and freedom for application phases.(Choose two.)
C.All application servers have hardcoded IP addresses.
D.Current business continuity and disaster recovery plans are based on tape technology.
E.Different vendors are used for the storage solution.