[单选题]
The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?
A. The Gallant router has the wrong LMI type configured
B. Inverse ARP is providing the wrong PVC information to the Gallant router
C. The S3. interface of the Steele router has been configured with the frame-relay encapsulation ietfcommand
D. The frame-relay map statement in the Attalla router for the PVC to Steele is not correct
E. The IP address on the serial interface of the Attalla router is configured incorrectly

更多"[单选题]The Frame Relay network in the"的相关试题:

[单选题]
Which encapsulation type is a Frame Relay encapsulation type that is supported by Cisco routers?
A. IETF
B. HDLC
C. Q933.3.-A Annex A
D. ANSI Annex D

查看答案

[单选题]A default Frame Relay WAN is classified as what type of physical network?
A. point-to-point
B. broadcast multi-access
C. nonbroadcast multi-access
D. nonbroadcast multipoint
E. broadcast point-to-multipoint

查看答案

[单选题]
What Frame Relay mechanism is used to build the map illustrated in the accompanying graphic?
A. inverse multiplexing
B. LMI maping
C. Inverse ARP
D. ARP
E. Proxy ARP

查看答案

[单选题]
The output of the show frame-relay pvc command shows "PVC STATUS=INACTIVE". What does thismean?
A. The PVC is configured correctly and is operating normally, but no data packets have been detected formore than five minutes.
B. The PVC is configured correctly, is operating normally, and is no longer actively seeking the addressthe remote route.
C. The PVC is configured correctly, is operating normally, and is waiting for interesting to trigger a call tothe remote router.
D. The PVC is configured correctly on the local switch, but there is a problem on the remote end of thePVC.
E. The PVC is not configured on the switch.

查看答案

[单选题]
Which dose the frame-relay interface-dlci command configure?
A. remote DLCI on the main interface
B. local DLCI on the main interface
C. local DLCI on the subinterface
D. remote DLCI on the subinterface

查看答案

[多选题]DHCP Relay 又称为DHCP 中继,如果需要配置DHCP Relay,那么需要包括以下哪些步骤?
A.配置DHCP 服务器组的组名。
B.配置DHCP 服务器组中的DHCP 服务器的 IF 地址。
C.配置启动DHCP Relay 功能的接口编号及接口的 IP 地址。
D.配置option82 插入功能。

查看答案

[多选题] 108
DHCP relay 又被称为DHCP中继,下列关于DHCP relay的说法正确的是?
A.DHCP 协议采用广播报文,如果出现多个子网则无法穿越,所以需要DHCP Relay设备
B.DHCP Relay 设备可以是一台路由器或者交换机
C.DHCPRelay设备可以是一台主机
D.DHCP Relay不改变报文内容,报文原样转发

查看答案

[多选题]DHCP Relay 又称为DHCP 中继,下列关于DHCP Relay 的说法正确的是?:(多选)
A.DHCP 协议多采用广播报文,如果出现多个子网则无法穿越, 所以需要DHCP Relay 设备。
B.DHCP Relay 一定是一台交换机或者路由器。
C. DHCP Relay 设备可以是一台交主机。
D. DHCP Relay 不能改变报文内容,报文原样转发。

查看答案

[多选题]108
DHCP relay 又被称为DHCP中继,下列关于DHCP relay的说法正确的是?
A.DHCP 协议采用广播报文,如果出现多个子网则无法穿越,所以需要DHCP Relay设备
B.DHCP Relay 设备可以是一台路由器或者交换机
C.DHCPRelay设备可以是一台主机
D.DHCP Relay不改变报文内容,报文原样转发

查看答案

[多选题]
Refer to the diagram. Which three statements describe the router port configuration and the switch portconfiguration as shown in the topology? (Choose three.)
A. The Router1. WAN port is configured as a trunking port.
B. The Router1. port connected to Switch1. is configured using subinterfaces.
C. The Router1. port connected to Switch1. is configured as 10. Mbps.
D. The Switch1. port connected to Router1. is configured as a trunking port.
E. The Switch1. port connected to Host B is configured as an access port.
F. The Switch1. port connected to Hub1. is configured as full duplex.

查看答案

[单选题]
Refer to the diagram. What is the largest configuration file that can be stored on this router?
A. 191.K bytes
B. 163.84.K bytes
C. 313.69.K bytes
D. 114.688.K bytes

查看答案

[多选题]
The switches shown in the diagram, Core and Core2., are both Catalyst 295.0.s. The addressing scheme for
Each company site is as follows:
Router Ethernet port - 1.st usable address
Core - 2.nd usable address
Core2. - 3.rd usable address
For this network, which of the following commands must be configured on Core2. to allow it to be managed
Remotely from any subnet on the network? (Choose three.)
A. Core2.(config)# interface f0./0.
B. Core2.(config)# interface vlan 1.
C. Core2.(config)# line con 0.Core2.(config-line)# password cisco
D. Core2.(config)# line vty 0. 4.Core2.(config-line)# password cisco

查看答案

[多选题]QUESTION 108
DHCP relay 又被称为 DHCP 中继，下列关于 DHCP relay 的说法正确的是：（多选）
A.DHCP 协议采用广播报文，如果出现多个子网则无法穿越，所以需要 DHCP Relay 设备
B.DHCP Relay 设备可以是一台路由器或者交换机
C.DHCP Relay 设备可以是一台主机
D.DHCP Relay 不改变报文内容，报文原样转发

查看答案

[单选题] "iLOCK联锁机VPS板“RELAY”指示灯亮红灯表示( )。
A.自检正常
B.VPS板故障
C.联锁机故障
D.电源指示灯"

查看答案

[单选题]QUESTION 49
在设备上配置DHCP RELAY 功能时，其中继连接客户端的VLANIF 接口必须绑定 DHCP 服务器组，而且绑定的 DHCP 服务器组中必须配置所代理的DHCP 服务器 IP 地址
A.正确
B.错误

查看答案

[单选题]49
在设备上配置DHCP Relay功能时,其中继连接客户端的VLANIF接口必须绑定DHCP服务器组,而且绑定的DHCP服务器组中必须配置所代理的DHCP服务器IP地址。
A.正确
B.错误

查看答案

[单选题] 49
在设备上配置DHCP Relay功能时,其中继连接客户端的VLANIF接口必须绑定DHCP服务器组,而且绑定的DHCP服务器组中必须配置所代理的DHCP服务器IP地址。
A.正确
B.错误

查看答案

[判断题]PING某台主机成功，路由器应出现Relay from 202.38.160.2……提示。
A.正确
B.错误

查看答案

我来回答:

提交