[单选题]An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.
TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.
TLS enabled virtual servers utilize certificates based on 2048-bit keys
During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?
A. 560 new TLS transactions will be silently discarded due to the SSL TPS license limit
B. Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit
C. 2060 new TLS transactions will be silently discarded due to the SSL TPS license limit
D. Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.

[单选题]An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?
A. HTTP monitor alias address 192 168.10 10. and set the alias to port 80
B. TCP monitor, alias address 192.168.10.10. and set the alias to port 80
C. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
D. TCP monitor, change transparent option to Yes, and sot the alias to port 80

[单选题]A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?
A. Forwarding (Layer 2)
B. Standard
C. Stateless
D. DHCP relay
E. Forwarding (IP)

[单选题]One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.
Which configuration item enables this behavior?
A. iRule
B. Gateway Fail Safe
C. Gateway pool monitor
D. Gateway pool

[单选题]An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
A. HTTP monitor, Receive String "error", and set the Reverse option to Yes
B. HTTP monitor and Receive String "error'' ... flag is up
C. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
D. HTTP monitor and Receive Disable String "error''.... flag is disable

[单选题]An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.
A. VS_172_24_1_WILDCARD
B. VS_HTTP_WILDCARD
C. VS_172_24_WILDCARD
D. VS_HTTPS_WILDCARD
Explanation:
Match the network segment first and then port.

[单选题]An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member. Which virtual server type should an LTM Specialist configure on the LTM device?
A. Stateless
B. Performance (HTTP)
C. Standard
D. Performance (Layer 4)
E. Forwarding (IP)

[单选题]An LTM device needs an additional traffic group.
Which configuration item is required?
A. Default device
B. Group name
C. MAC Masquerade Address
D. Auto Fallback Timeout

[单选题]An LTM device configured with a management IP address and route and a series of self-IPs and TMM routes. Both management and TMM have a routing entry for 101 10/24 Application traffic is being load balanced and sent to pool member 10.1.1.123 with SNAT Automap and configured.
Which route will the LTM device use?
A. TMM route regardless of the management port status
B. both routes, which will duplicate traffic on both management and TMM interface
C. equal cost multipath load balancing via both routes
D. management route when TMM interface is down or TMM is offline
E. management route regardless of the management port status

[单选题]An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?
A. Forwarding (IP)
B. Performance (HTTP)
C. Standard
D. Stateless
E. Performance

[单选题]Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?
A. Remote User role
B. Admin account
C. User role
D. User account

[单选题]A design requires the LTM device to become HA standby when the one of the two physical interface on the External trunk is down the External trunk is an interface on the External VLAN
Which TMOS command enables this behavior?
A. tmsh modify net van External failsafe enabled
B. tmsh create sys ha-group External trunks add Externally
C. tmsh create sys ha-group External trunks add External threshold 2 weight 101)
D. tmsh create sys ha-group External trunks add ( External( attribute percent up-members 100))

[单选题]An LTM Specialist needs to load balance an application using an LTM device to meet the requirements:
The application servers do NOT Support SSL, but client access to the application should be secured. Multiple requests from the same client should be sent to the same pool member.
All pool members will have roughly the same processing power, and traffic should be distributed evenly. The LTM device is NOT the pool members' default gateway.
Which configuration should the LTM Specialist?
A. a performance 14 virtual server with a SNAT and cookie persistence
B. a performance L4 virtual server with a Client SSL profile and Source Address persistence
C. A performance L4 virtual server with a SNAT, HTTP profile. Server SSL profile, and cookie persistence
D. A standard virtual server with a SNAT, HTTP profile Server SSL profile, and cookie persistence
E. A standard virtual server with a SNAT, HTTP profile, Client profile, andd cookie persistance.

[单选题]TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
A. The HA network is using the default routing domain.
B. The HA network is using multicast IP.
C. The HA network is not configured for mirroring.
D. The HA network latency is too high.

[单选题]An HA pair of LTM devices that load balance multiple HTTPS applications utilizes highly customized RAM Cache and compression profiles on each virtual server. The LTM Specialist who is administering the HA pair regularly observes entines in the log similar to the following:
Tmm tmm I708S1 011e0002.4. sweeper_update: aggressive mode activated (117504/138240 pages) No DoS attacks arc occurring. No user problems have been reported.
Which step should the LTM Specialist take to help mitigate the issue?
A. change the Adaptive Reaping High watermark
B. change the Adaptive Reaping Low watermark
C. allocate less memory to the RAM cache feature
D. use a OneConnect profile

[多选题]An LTM device configuration is as shown:
The safer , easier way to help you pass any IT exams.
What should be the two expected outcomes based on this configuration? (Choose two.)
A. A client session that has been idle for 16 minutes will be sent to the same pool member
B. A client session that has been idle for 20 minutes will be balanced to a new pool member
C. A client session that has been idle for 14 minutes will be balanced to a new pool member
D. A client session that has been idle for 48 minutes will be sent to the same pool members
E. A client session that has been idle for 12 minutes will be sent to the same pool member

[单选题]Exhibit.
The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover. Which HA functionality works in this case?
A. ConfigSync does NOT work. Connection Mirroring floes NOT work.
B. ConfigSync works Connection Mirroring works
C. ConfigSync works. Connection Mirroring docs NOT work
D. ConfigSync does NOT work; Connection Mirroring works

[单选题]Refer to the exhibit.
The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback
Enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds. Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?
A.LTM1: Traffic Group CLTM2: Traffic Groups
A,
B, and 0
B.LTM1: No Traffic GroupsLTM2: Traffic Groups
A,B.
C, and DC.

[单选题]We cannot load heavy lifts this morning because the floating crane is not ____( )
A. available
B. standing by
C. waiting
D. useful

[单选题]An LTM Specialist observes decreased performance and intermittent connection reap LTM system.
Based on the configuration, which action will address these issues?
A. Use an optimized TCP profile.
B. Use a FastL4 profile on the virtual server
C. Use a default caching profile on the virtual server.
D. Use a shorter idle timeout on the TCP profile.