更多"下面是路由器R3的部分配置,请根据题目要求,完成下列配置。 R3(c"的相关试题:
[填空题]下面是路由器R3的部分配置,请根据题目要求,完成下列配置。
R3(confg)# access-list 110 deny (8) 192.168.20.0 0.0.0.255 10.10.10.00.0.0.255 eq (9)
R3(config)# access-list 110 permit ip any any
[填空题]下面是路由器R1的部分配置,请根据题目要求,完成下列配置。
R1(config)#interace Serial0
R1(config-if)#ip address (1) (2)
R1(config)#ip routing
R1(config)# (3) (进入RIP协议配置子模式)
R1(config-router)# (4) (声明网络192.168.1.0/24)
[填空题]下面是交换机完成Trunk的部分配置,请根据题目要求,完成下列配置。
SwitchA (config)#interface e0/3 (进入端口3配置模式)
SwitchA (config-if)#switchport (6) (设置当前端口为Trunk模式)
SwitchA (config-if)#switchport trunk allowed (7) (设置允许所有VLAN通过)
SwitchA (config-if)#exit
SwitchA (Conflg)#exlt
Switch#
[填空题]
下面是交换机完成Trunk的部分配置,请根据题目要求,完成下列配置。
SwitchA(config)#
interface f0/3 (进入端口3配置模式)
SwitchA(config-if)# switchport (6)
(设置当前端口的Trunk模式)
SwitchA(config-if)# switchport trunk
(7) (设置允许所有Vlan通过)
SwitchA(config-if)# exit
SwitchA(config)# exit
Switch#
[填空题]下面是路由器R2的部分配置,请根据题目要求,完成下列配置。
R2# config t
R2(config)# access-list 50 deny 192.168.20.0 0.0.0.255
R2(config)# access-list 50 permit any
R2(config)# interface (5)
R2(config-if)# ip access-group (6) (7)
[填空题]根据网络拓扑和R1的配置,解释并完成路由器R3的部分配置。
…
R3(config)#crypto isakmp key (7) address (8)
R3 (config)# crypto transform-set testvpn ah-md5-hmac esp-dex esp-md5-hmac (9)
R3 (cfg-crypto-trans)#exit
R3 (Config)#crypto map test 20 ipsec-isakmp
R3 (config-crypto-map)#set peer 192.168.1.1
R3 (config-crypto-map)#set transform-set (10)
…
[填空题]下面是交换机完成端口配置的过程,请根据题目要求,完成下列配置。
Switch(config)# interfacee e0/7 (进入端口7的配置模式)
Switch(config-if)# (8) (设置端口为静态VLAN访问模式)
Switch(config-if)# (9) (把端口7分配给VLANl0)
Switch(config-if)#exit
Switch(config)#exit
[填空题]
下面是交换机完成端口配置的过程,请根据题目要求,完成下列配置。
Switch(config)# interface
f0/7 (进入端口7配置模式)
Switch(config-if)# (8)
(设置端口为静态VLAN访问模式)
Switch(config-if)#
(9) (把端口7分配给Vlan10)
Switch(config-if)# exit
Switch(config)# exit