更多"阅读以下的配置信息,解释(6)处的命令,将答案填写在相应的位置。 Sw"的相关试题:
[简答题]阅读以下的配置信息,解释(7)处的命令,将答案填写在相应的位置。
Switch#cofing t
Switch(cofing)#nterface fo/5 //进入接口5配置模式
Switch(coling-if)#switchport mode access (7)
Switch(cofing-if)#switchport access vlan 2 //把端口5分配给相信的vlan2
Switch(cofing)#exit
Switch(cofing)#interface fo/6
Switch(cofing-if)#switchport mode access
Switch(cofing-if)#switchport access vlan 3
Switch(cofing-if)#exit
Switch(cofing)#exit
Switch#
[简答题]
阅读以下的配置信息,解释(7)处的命令,将答案填写在相应的位置。
Switch#cofing t
Switch(cofing)#nterface fo/5 //进入接口5配置模式
Switch(coling-if)#switchport mode access (7)
Switch(cofing-if)#switchport access vlan 2 //把端口5分配给相信的vlan2
Switch(cofing)#exit
Switch(cofing)#interface fo/6
Switch(cofing-if)#switchport mode access
Switch(cofing-if)#switchport access vlan 3
Switch(cofing-if)#exit
Switch(cofing)#exit
Switch#
[简答题]
阅读以下的配置信息,解释(5)处的命令。
Switch#
Switch#cofing
Switch(cofing)#interface fo/1 //进入接口1配置模式
Switch(cofing-if)#switchport mode truck (5)
Switch(cofing-if)#switchport truck allowed vlan all //设置允许从该接口交换数据的vlan
Switch(cofing-if)#exit
Switch(cofing)#exit
Switch#
[填空题]阅读以下配置信息,补全横线处处的命令(Cisco IOS系统下)。
Switch #
Switch # config t
Switch # (config) # interface f0/1 进入接口1的配置模式
Switch # (config-if) # ______ 配置VLAN Trunk模式
Switch # (config-if) # ______ 设置允许从该接口交换数据的VLAN
Switch(vlan) # vlan 2 创建一个VLAN2
VLAN 2 added:
Name: VLAN0002 系统自动命名
Switch(vlan) # ______ 创建一个VLAN3,并命名为VLAN3
VLAN 3 added:
Name: vlan 3
Switch(config) # interface f0/5 进入端口5的配置模式
Switch(config-if) # ______ 设置当前端口为静态VLAN访问模式
Switch(config-if) # ______ 把端口5分配给VLAN2
Switch(config) # exit
Switch #
[填空题]以下命令针对网络服务的端口配置,解释以下配置命令:
firewall(config)#fixup protocol http 8080 (10)
firewall(config)#no fixup protocol ftp 21 (11)
[简答题]
以下是指定VPN在建立连接时协商IKE使用的策略,阅读下面的配置信息,解释 (6)、(7)处的命令。
Router (config) # crypto isakmp policy 10 (定义策略为10)
Router (config-isakmp) # hash md5 (6)
Router (config-isakmp) #authentication prc-sharc (7)
Router (config-isakmp) # exit
Router (config) # crypto isakmp key cisco123 address 0,0.0.0 0.0.0.0
(配置预共享密钥为cisc0123,对等端为所有IP)
[简答题]阅读下面的配置信息,将(1)~(4)处空缺的内容填写在相应位置。
SW1>enable (进入特权模式)
SW1#vlan database (进入VLAN配置子模式)
SW1(vlan)#vtp server (设置本交换机为Server模式)
SW1(vlan)#vtp domain (1) (设置域名)
SW1(vlan)# (2) (启动修剪功能)
SW1(vlan)#exit (退出VLAN配置模式)
SW1#show (3) (查看VTP设置信息)
VTP Vetsion :2
Configuration Revision :0
Maximum VLANs supported locrlly :64
Number of existing VLANs :1
VTP Operating Mode :Server
VTP Domain Name :Server1
VTP Pruning Mode :Enable
VTP V2 Mode :Disabled
VTP Traps Generation :Disabled
MD5 digest :0x82 0x6B 0xFB 0x94 0x41 0xEF 0x92 0x30
Configuration last modified by 0.0.0.0 at 7-1-05 00:07:51 SW2#vlan database
SW2(vlan)#vtp domain NULL
SW2(vlan)# (4)
Setting device to VTP CLIENT mode.
SW2(vlan)#exit
[简答题][问题4]
阅读下面的配置信息,解释(6)处的命令。
Switeh#vlan
Switch(vlan)#vlan 2 (创建一个VLAN2)
VLAN 2 added:
Name:VLAN0002 (系统自动命名)
Switch(vlan)#vlan 3 name vlan3 (6)
VLAN 3 added:
Name:vlan3
Switch(vlan)#exit
[填空题]阅读以下防火墙配置命令,为每条命令选择正确的解释。
firewall(config)#global (outside) 161.144.51.46 (5)
firewall(config)#nat (inside) 1 0.0.0.0 0.0.0.0 (6)
firewall(config)#static (inside,outside) 192.168.0.8 61.144.51.43 (7)
A. A.当内网的主机访问外网时,将地址统一映射为61.144.51.46
B.当外网的主机访问内网时,将地址统一映射为61.144.51.46
C.设定防火墙的全局地址为61.144.51.46
D.设定交换机的全局地址为61.144.51.46
[简答题][问题3]
阅读下面的配置信息,解释(5)处的命令。
Switch#
Switch#config
Switch(config)#interface f0/1 (进入接口1配置模式)
Switch(config-if)#switchport mode trunk (5)
Switch(config-if)#switchpoft trunk allowed vlan all (设置允许从该接口交换数据的VLAN)
Switch(config-if)#exit
Switch(config)#exit
SwitCh#
[简答题][问题5]
阅读下面的配置信息,解释(7)处的命令。
Switch#config t
Switch(eonfig)#interface f0/5 (进入端口5的配置模式)
Switch(config-if)#switchport mode access (7)
Switch(config-if)#switchport access vlan 2 (把端口5分配给相信的VLAN2)
Switch(config-if)#exit
Switch(config)#interface f0/6
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 3
Switch(config-if)#exit
Switch(config)#exit
Switch#