[单项选择]The equipment that connects with the actors in the experiment is used for______.

[单项选择]The equipment that connects with the actors in the experiment is used for ______

[多项选择] In a lab, R1 connects to R2, which connects to R3. R1 and R2 each have several working interfaces, all assigned addresses in class A network 10.0.0.0. Router R3 has some working interfaces in class A net work 10.0.0.0, and others in class B network 172.16.0.0. The engineer experiments with the auto -summary command on R2 and R3, enabling and disabling the command in various combinations. Which of the following combinations will result in R1 seeing a rout e for 172.16.0.0/16, instead of the individual subnets of class B network 172.16.0.0?（）
A. auto - summary on R2 and no auto - summary on R3
B. auto - summary on R2 and auto - summary on R3
C. no auto -summary on R2 and no auto- summary on R3
D. no auto - summary on  R2 and auto - summary on R3

[单项选择]Which interface type connects the control and forwarding planes on an MX Series device?（）
A. fxp1
B. fxp0
C. me0
D. ae1

[单项选择] A server connects to iSCSI presented SAN storage array through a dedicated NIC; however, the SAN traffic is passed on the same switches as the Ethernet network and VoIP traffic. The size of the presented drive is 700GB. The administrator has noticed a decrease in storage performance. Which of the following is MOST likely the cause?（）
A. The server power supply is starting to fail and causing the iSCSI NIC to intermittently lose power.
B. There are too many users attempting to access the iSCSI presented disk.
C. The other network traffic is causing packet delays in the iSCSI network.
D. The SAN is nearing capacity and should be expanded

[多项选择] Enterprise Router R1 connects an Enterprise to the Internet. R1 needs to create and advertise a default route into the Enterprise using EIGRP. The engineer creating the implementation plan has chosen to base this default route on the ip route command, rather than using i p default - network. Which of the following is not a useful step with this style of default route configuration?（）
A. Create the default route on R1 using the ip route 0.0.0.0 0.0.0.0 outgoinginterface command.
B. Redistribute the statically configured defa ult route.
C. Disable auto - summary.
D. Configure the network 0.0.0.0 command.
E. Ensure R1 has no manually configured summary routes using the ip summary- address eigrp command.

[单项选择]What problem do actors have with newspaper publicity
A. It never focuses on the actors who deserve it.
B. It often does more harm than good,
C. It never reports what actors have actually said.
D. It often makes mistakes when reporting facts.

[单项选择] Router R1 connects to a Frame Relay cloud using a multipoint subinterface, with ten PVCs associated with the subinterface. What command would make this router not use a DR and require static OSPF neighbor definition?（）
A. ip ospf network broadcast
B. ip ospf netw ork non - broadcast
C. ip ospf network point - to - multipoint
D. ip ospf network point - to - multipoint non - broadcast

[单项选择]When a non-root user connects to a JUNOS platform and enters a username and password, the user is immediately placed at which level?（）
A. UNIX shell
B. user level CLI
C. configuration mode
D. operational mode

[单项选择]Which of the following connects the L2 cache to the processor?（）
A. PCI
B. Frontside bus
C. Backside bus
D. System I/O bus

[单项选择]The actors in the theater were attracted to Shakespeare because ______.
A. they found his conversation very interesting
B. he took care of horses for a theatre lover
C. he was familiar with them
D. he had become famous upon arriving there

[单项选择]Harriet says that after actors have played a particular character, they
A. may be asked to play other similar characters.
B. may become a bit like the character.
C. will never want to play the part again.
D. will never forget how to play the part.

[单项选择]There were many talented actors out there just waiting______.
A. to discover
B. to be discovered
C. discovered
D. being discovered

[单项选择] Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured. Which combinations accurately describe the interface under which a feature will be configured?（）
A. PPP on the ATM interface
B. VPI/VCI on the dialer interface
C. IP address on the ATM interface
D. CHAP on the dialer interface

[多项选择] Enterprise Router R1, in ASN 1, connects to ISP Router I1, ASN 2, using eBGP. The single serial link b etween the two routers uses IP addresses 10.1.1.1 and 10.1.1.2, respectively. Both routers use their S0/0 interfaces for this link. Which of the following commands would be needed on R1 to configure eBGP?（）
A. router bgp 2
B. router bgp 1
C. neighbor 10.1 .1.2 remote - as 2
D. neighbor 10.1.1.2 Update - source 10.1.1.1
E. neighbor 10.1.1.2 Update- source S0/0

[单项选择]My relationship with the actors is {{U}}fundamental{{/U}} to my work as a director.
A. impressive
B. public
C. essential
D. slight